This is a multi-use and multi-appliance screw. It can be used on a microwave, refrigerator, range/oven, air conditioner, dehumidifier, washer, or dryer. The measurements of this screw are 8 x 1/2 inch...
$28.95
In Stock
Order within the next 8 hrs and your part ships today!
Enhance the functionality of your Samsung or General Electric refrigerator with the Door Mullion Spring. A genuine replacement part directly from Samsung, this crucial piece ensures the smooth opening...
$6.16
In Stock
Order within the next 8 hrs and your part ships today!
Enhance the functionality and convenience of your Samsung Refrigerator with the reliable Hinge - French Door. Brought to you by trusted brand Samsung, this product is meticulously designed to provide ...
This 9 Cube Icemaker Assembly is a brilliant contribution from the trusted brands of Samsung and General Electric, designed to seamlessly fit and function within your refrigerator unit. Renowned for i...
Introducing the Spring PIN - French from the renowned brand Samsung. This vital component for your Samsung Refrigerator is expertly designed to bring optimal performance and longevity. Crafted using h...
$2.99
In Stock
Order within the next 8 hrs and your part ships today!
This Samsung Ice Maker Assembly, known by its part title DA97-07603B, is an essential component for your Samsung Refrigerator. This original and robust piece of equipment is designed with precision by...
Revive the wide array of your appliances including your Samsung Refrigerator, Samsung Dryer, Samsung Washer, and even your Samsung Dishwasher with the Tapping Screw, a crucial component engineered by ...
$2.99
In Stock
Order within the next 8 hrs and your part ships today!
The Grommet Hinge Middle is an essential component of your Samsung refrigerator. This top-quality appliance part facilitates the easy and seamless functioning of the fridge door, ensuring greater long...
$4.89
In Stock
Order within the next 8 hrs and your part ships today!
Improve the functionality of your refrigerator with this Shelf Support End Cap from the trusted brand, Samsung. This essential appliance part provides a cover for the end of the shelf support, providi...
$2.99
In Stock
Order within the next 8 hrs and your part ships today!
Offering a solution to a filled ice bin stalling your ice production, this ice maker shut-off arm from Samsung fits perfectly into your refrigerator, ensuring things run smoothly. It works by halting ...
$10.64
In Stock
Order within the next 8 hrs and your part ships today!
Keep your Samsung or Maytag Refrigerator at optimum performance with our Ice Cube Tray. This part is specifically designed for these brands, ensuring functionality and providing the perfect fit for yo...
$32.10
In Stock
Order within the next 8 hrs and your part ships today!
Get your Samsung Refrigerator back to optimal performance with our genuine Samsung COVER-HEATER FRENCH. Specifically crafted for your Samsung Refrigerator, this durable part ensures proper functionali...
$12.13
On Order
Questions And Answers for RF268ABRS
Ask our experts a question about this model and we'll get back to you as soon as possible!
5 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
MARILYN
June 19, 2022
HOW TO CHANGE WATER FILTER
For model number RF268ABRS
Hi Marilyn,
Thank you for your question. According to your owner's manual, take a new water filter and put a month indicator sticker on it. The date on the sticker must be six months from the current date. For example, if you are replacing the water filter in March, put the "SEP" (September) sticker on the filter to remind you to replace it in September. Normal filter life is about 6 months. Remove the new filter's protective cap and remove the old filter. Position and insert the new filter into the cover filter. Slowly turn the water filter clockwise to align it with the printing mark on the cover, locking the filter in position. Make sure to align the water filter label mark with the center of cover filter. Remember, do not over-tighten. After the above steps, press and hold the Alarm/Hold 3 sec for Filter Reset button for 3 seconds to reset the filter. Lastly, run about six glassfuls of water through water dispenser to clean the water supply system. Make sure that water flows cleanly again before drinking. Be sure to flush the dispenser thoroughly otherwise air will become trapped in the water lines and water may drip from the dispenser. If you have any questions, please let us know. We are open 7 days a week. We look forward to hearing from you!
1 personfound this helpful.
Was this helpful?
Thank you for voting!
Beth
September 3, 2021
How do I turn the ice maker off
For model number RF268ABRS
Hello Beth, Thank you for the question. There is no On and Off switch for this ice maker, you will just need to unplug the Wire Harness. We hope this helps!
Was this helpful?
Thank you for voting!
Charlie
September 22, 2022
Water has accumulated under the cool select pantry and froze and the try cannot be pulled out. It appears that the tray support glider under the try is encased in ice. What could be the source for the water.?. The water filter and Ice been are dry
For model number RF268ABRS
Hello Charlie, Thank you for your inquiry. Researching the model number that you have provided, you could have a frozen or clogged drain tube at the bottom of the refrigerator. Check the drain tube and the drip tray at the back of the refrigerator for any clogs or excessive water in the pan. If there is a lot of water in the drip pan, the evaporator and condenser fan may not be evaporating it off. Good luck with your repair.
I’m need to replace the cool pantry select drawer. Can’t find it.
For model number RF268ABRS
Hello Cathy, thank you for your question. The pantry select drawer, part number PS4172600, is compatible with your model. We hope this information helps!
the light on the ice and water panel does not come on and can't see where water, ice selections are
For model number RF268ABRS
Hello Lillie, thank you for the great question. Based on our understanding of the issue, we would suggest you replace the dispenser control panel, part number PS4173374, to fix the issue. We hope this helps, good luck with this repair!
OMG seriously! I stopped into my go-to appliance repair shop to ask about what might be needed to repair the problem with my refrigerator door. They said you will need to replace the Mullion Flap piece. Cost would be $250-300 with part, labor and service. I went on line to see if I could handle the repair process myself. I found a How to - U Tube video and turns out I only needed to replace a little spring and pin not the whole Mullion Flap. Went to Parts select, ordered the spring and pin and did the repair myself in about 5 minutes. Shipping was $7 so I ended up paying $13 total.
The installation video notes that the door mullion spring has a bent end, and that the bent end of the spring is to be inserted into the LOWER hinge. However, on my refrigerator door, the bent end of the door mullion spring must be inserted into the UPPER hinge in order for the door to function properly. (Also noted that in your video the installer manually closed the door mullion rather than just closing the refrigerator door, another indication that the installation of the spring was incorrect.) After watching the video several times to confirm I was installing the door mullion spring according to the video instructions, I tried inserting the bent end of the door mullion spring into the upper hinge, which proved to be the correct installation of the door mull spring. What should have been a 5 minute repair turned into an ½ hour repair.
Placed new spring pin and new spring in place with pliers-10 seconds tops. HOWEVER!! Your instruction video is INCORRECT. Spring must be placed opposite of video with bent side toward million otherwise million is flipped outward not held closed. Two frustrating days before I figured that out.
