Ask our experts a question about this model and we'll get back to you as soon as possible!
1 question answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
George
September 21, 2025
Water filter rotates but won't come down off connection any ideas?
For model number RF267ABRSXAC
Hello George, thank you for getting in touch. Try to remove the filter by rotating it counterclockwise and pulling straight out, potentially with a slight wiggle to release any mineral deposits. If it's still stuck, you may need to try applying slightly more pressure with a cloth for grip, or warm the filter area to loosen deposits, but avoid forcing it to prevent damage. We hope this helps.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
Removed handles on Refrigerator and Freezer Door by forcing handles up by pushing in and lifting them up. Unscrewed Phillips screws holding handle mounts to the handles. Placed handle assemblies over the door mounts and slid them down to lock in place.
YouTube the video on how to replace the ice maker. Unplugged the fridge, one screw was removed to open a small cover panel to access where the ice maker was plugged in, unplugged the ice maker, pushed a small locking clip and pulled the old ice maker off the keyhole slots holding it in place removing it from the fridge. Did the steps in reverse and reinstalled the new one. Plugged the fridge back in and reset the fridge by holding the energy saver and alarm button on the front door simultaneously for 8-10 seconds until it beeped. Took a few seconds and the fridge reset
