RF18HFENBSR (US-53) Samsung Refrigerator - Overview

Sections of the RF18HFENBSR

[Viewing 6 of 6]
Keep searches simple, eg. "belt" or "pump".
Hinge – Part Number: DA61-08305A
Hinge
★★★★★
★★★★★
(1)
PartSelect #: PS4145262
Manufacturer #: DA61-08305A
$12.30
  In Stock
Ice Maker Assembly – Part Number: DA97-07603B
Ice Maker Assembly
PartSelect #: PS5575313
Manufacturer #: DA97-07603B
This is a 40W/120V ice maker assembly for your refrigerator. Ice maker assemblies are designed to continuously make ice cubes by supplying water through its valve, freezing it, and then ejecting the c...
$156.38
  On Order
Refrigerator Door Gasket - White – Part Number: DA63-07733A
Refrigerator Door Gasket - White
PartSelect #: PS9603850
Manufacturer #: DA63-07733A
To ensure optimal functionality and energy efficiency of your refrigerator, the Samsung Refrigerator Door Gasket (part number DA63-07733A) is designed to create an airtight seal on the door. This seal...
$104.78
  In Stock
Door Support with Mullion Heater - White – Part Number: DA97-07661C
Door Support with Mullion Heater - White
★★★★★
★★★★★
(1)
PartSelect #: PS4175373
Manufacturer #: DA97-07661C
This white-colored flipper or mullion assembly serves as a seal mechanism found between the French doors of your refrigerator. It measures 36 inches in length and 2 inches in width. Positioned along t...
$180.16
  On Order
Refrigerator Crisper Drawer – Part Number: DA97-11620B
Refrigerator Crisper Drawer
★★★★★
★★★★★
(1)
PartSelect #: PS4176405
Manufacturer #: DA97-11620B
The crisper drawer stores fruits and vegetables at a humidity level that helps keep them fresh longer.
$181.12
  In Stock
Door Handle Support – Part Number: DA61-08077A
Door Handle Support
PartSelect #: PS5575052
Manufacturer #: DA61-08077A
$51.03
  In Stock
Water Inlet Valve – Part Number: DA62-01477A
Water Inlet Valve
★★★★★
★★★★★
(1)
PartSelect #: PS4146610
Manufacturer #: DA62-01477A
$110.59
  On Order
Ice Cube Tray – Part Number: DA63-02284B
Ice Cube Tray
PartSelect #: PS4149221
Manufacturer #: DA63-02284B
$32.84
  In Stock
French Assembly – Part Number: DA97-07661G
French Assembly
★★★★★
★★★★★
(1)
PartSelect #: PS4175375
Manufacturer #: DA97-07661G
$152.05
  On Order
Tapping Screw – Part Number: 6002-000213
Tapping Screw
PartSelect #: PS4133148
Manufacturer #: 6002-000213
$5.95
  In Stock
Refrigerator Handle End Cap Left – Part Number: DA97-11912L
Refrigerator Handle End Cap Left
PartSelect #: PS12707372
Manufacturer #: DA97-11912L
This left handle end cap assembly is designed to secure the refrigerator door handle while concealing the mounting hardware for a clean, finished appearance. Installed on the left side of the handle a...
$56.29
  On Order
Rivet Caster – Part Number: DA61-01920A
Rivet Caster
PartSelect #: PS4143247
Manufacturer #: DA61-01920A
This roller wheel axle pin (part number DA61-01920A) is for refrigerators. Roller wheel axle pin DA61-01920A attaches the roller wheel to the roller wheel bracket. Wear work gloves to protect your han...
$5.95
  In Stock

Common Symptoms of the RF18HFENBSR

[Viewing 6 of 6]
Door won’t open or close
Fixed by
these parts
Fixing Fixing Fixing
Show All
Ice maker not making ice
Fixed by
these parts
Fixing Fixing
Show All
Fridge too warm
Fixed by
these parts
Fixing
Show All
Noisy
Fixed by
these parts
Fixing
Show All
Door Sweating
Fixed by
these parts
Fixing
Show All
Ice maker won’t dispense ice
Fixed by
these parts
Fixing
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
old gasket mold and torn
Pull out old one from right top. Wipe track with a cloth and some Windex. Wipe with clean cloth place gasket over where it will replace old. Start right top push into track. Time 10 minutes once all seated again go over the entire gasket check all in track push with thumb easy replacement!!
Parts Used:
Refrigerator Door Gasket - White
  • Derek from MALIBU, CA
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
4 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The spring broke on the door flopper
I didn't do the repair because you sent me the wrong part.That was mislabeled. Then you want me to ship it back but didn't pay for the shipping?And that would be twelve dollars so it's going in the trash!! Very displeased
Parts Used:
Divider Door Spring
  • Stephanie from MANCHESTER, CT
  • Difficulty Level:
    Very Difficult
  • Total Repair Time:
    More than 2 hours
8 of 17 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The ice maker was overflowing and freezing over
I watched several repair videos and decided I could do this because I have been doing mechanical work for over fifty years.The videos convinced me it needed replaced it is a 2009 model I bought new. I ordered the new part from parts select it came in 3 or 4 days.The hardest part was removing the freezer door and reinstalling when I was done.That wasn’t complicated just awkward.Removing the ice maker was simple and replacing it with the new one was easy.There was a protective plate on the front of the old one that wouldn’t fit on the new one.So I left it off.So far it has been working very well.
Parts Used:
Ice Maker Assembly
  • Paul from Streator, IL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Socket set, Wrench set
2 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!