Also known as Probe. The quick connect on this part may be different than your original part. If it doesn't fit, you have to cut off the quick connect and wire together with porcelain wire nuts.
$80.31
In Stock
Order within the next 5 hrs and your part ships today!
This 40-watt appliance light bulb is a reliable replacement for use in select ranges, refrigerators, freezers, and microwaves. It provides bright, consistent lighting to help you see clearly inside yo...
$30.38
In Stock
Order within the next 5 hrs and your part ships today!
This broil element is found on the roof of the oven and heats food. The most common reasons you would need to replace this part is due to the oven not giving off enough heat, not turning on, or not ba...
$212.74
In Stock
Order within the next 5 hrs and your part ships today!
This cooktop element gives you two heating sizes in one—9 inches and 6 inches—so you can cook with different pots and pans easily. It heats up fast and evenly, helping meals cook just right. If your c...
$226.02
In Stock
Order within the next 5 hrs and your part ships today!
This is a surface burner infinite switch kit for your range or oven. This replacement part activates and deactivates your burner, and controls the burner heat. If you are not getting any heat to your ...
$122.85
In Stock
Order within the next 5 hrs and your part ships today!
Ask our experts a question about this model and we'll get back to you as soon as possible!
6 questions answered by our experts.
< Prev
1
2
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Derrick
November 30, 2019
Stove beeping receiving code f1
For model number PLES389DCC
Hi Derrick, try unplugging the unit and plugging it back in, if this error persists you will likely need to replace the control board. sadly I could not find this part, I recommend contacting the manufacturer directly. If they can provide you with a part number you can also check back to see if we stock the part. Thank you for your question and good luck with your repair!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Marcus
March 6, 2023
My faceplate overlay numbers around knobs is all worn off. Just need a replacement plate
Please help if you can
Thank You!
For model number PLES389DCC
Hello Marcus, thank you for contacting us. The front panel assembly, part number PS900094, will fit your model. Customer service is available 7 days a week if you need help placing an order! Glad to be of assistance!
Hello Dan, thank you for contacting us. According to our research, we are providing you with the link that will help you in unlocking the oven door. We hope this solves your problem!
One element on stove stays on high regardless of setting. The other 3 work well
For model number PLES389DCC
Hi Bruce,
Thank you for your question. If you set the burner to your desired temperature and it goes to a higher setting, the issue is the burner switch and it will need to be replaced. We hope this helps!
bURNER CONTROL GOT PUSHED BACK AND i NEDD TO OPEN THE PANNEL TO GET IT BACK OUT.
hOW DOES THE PANNEL COME OUT
For model number PLES389DCC
Hello William, thank you for contacting us. Remove the control knobs, they should slide off with firm pressure. Remove the screws on the overlay panel, which will give access to the control panel. You will also need to unscrew the control panel if controls are stuck beneath it. Unscrew it, you can now access all the controls and buttons. We hope this information helps.
Was this helpful?
Thank you for voting!
< Prev
1
2
Next >
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
The repair was simple; first I removed the 2 screws from the old element and disconnected the wires and then I inserted the new element reconnected the wires and replaced the screws . The repair was easy and took less that 15 min. The oven works as good as new and I saved alot of money by doing it myself.
Replaced clock control by removing surface burner control knobs and plastic nuts, and then the cover over the oven control. Two screw hold the clock in place, after removal and disconnecting the plug-in you can reinstall the new clock control. The Heat Sensor inside the oven will also need to be replaced. It is located inside the oven and attached with two screws; the back of the oven will need to be removed to unplug. Reverse removal procedure and turn the power back on to the stove.
PF alarm appeared on display. Noticed clicking when cord was moved. Had arced for some time and melted original block. New part slightly different. Only has 3 lugs, old one had six. Stack using washers provided. Take note of colors before disassembly. Use caution while working through access opening. The edges are sharp. Only tools needed are phillips screwdriver, deep socket for lug nuts. Nut driver optional. Hope this is helpful.
