All Installation Instructions for General Electric Refrigerator PFSS6SKXCSS

Yearly replacement of filter

Moved stuff out of my way on the top shelf, reached in and turned old filter to remove. Filled new filter with water, lined up and turned to lock in place. Whew, never thought I would get that job done. :-)

Parts Used:

Refrigerator Ice and Water Filter

Robert from Myrtle Beach, SC
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

2 of 3 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Door would not close properly

Spent a dollar 1.97 on the spring.7.00 on shipping and fixed it in less than 5 minutes.Fantastic

Parts Used:

Door Mullion Spring

Deryl from KINGWOOD, TX
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

2 of 3 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Broken spring on french door

Placed lower spring leg in hole first. Manipulated upper spring leg into upper hole with needle nose pliers.

Parts Used:

Door Mullion Spring

John from CADILLAC, MI
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers

2 of 3 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Ice Makes was cracked and part was broken off.

Took out the old piece. Washed and replaced with the new one.

Parts Used:

Ice Bucket Assembly with Auger

Rose Marie from CONSHOHOCKEN, PA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

3 of 6 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

french door closing flap

Remove a couple screws unplug part. Plug new part in and replace screws.

Parts Used:

ASM-FRENCH

Inda from Norfolk, VA
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

4 of 9 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

door spring

replacing broken french door spring.

Parts Used:

Door Mullion Spring

Libor from Danbury, CT
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers

1 person found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Warm refrigerator compartment.

Parts fit perfect. Very satisfied.

Parts Used:

Evaporator Fan Motor

EVAP MOTOR FZ LEFT

john from HAMPTON BAYS, NY
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers, Wrench (Adjustable)

5 of 13 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Water flow 1 qt. Then slows

Water flow restrictions. Replaced flow valve. No help. Checked again and found filter head flow stopping valve broken. Replaced same. All good.

Parts Used:

Water Filter Head

Chris from OWASSO, OK
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers, Wrench set

1 person found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Bad tasting ice cubes

Took the old filter out and put the new one in.
Easy Breezy!!

Parts Used:

Refrigerator Ice and Water Filter

susan from hartford, WI
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins

2 of 4 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Water dispensed at a trickle

I only had to remove the old filter and install the new one - all by hand. I then ran about 1 to 1and1/2 gallons of water through the filter to clear it.
A WORD OF CAUTION - HOLD YOUR GLASS CLOSE TO THE WATER DISPENSER FOR THE INITIAL FILLING - IT WILL SPIT UNTIL THE AIR IS PURGED FROM THE SYSTEM!!!
An extremely easy repair.

Parts Used:

Refrigerator Ice and Water Filter

JAMES from MORENO VALLEY, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

3 of 7 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Just follow instructions. Easy

Held spring with needle nose pliers and slipped into place

Parts Used:

Door Mullion Spring

David from NORTHWOOD, NH
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers

2 of 4 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Door flap would not close properly

Show how to fix it on YouTube so that helped a lot. I ordered a new spring gave all the correct information and the spring was too big that showed up
lol so had to go to Plan B an modified the broken spring lol works great now

Parts Used:

Door Mullion Spring

Jeffrey from EAST HARTFORD, CT
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers

1 person found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Icemaker worked except for warming coil which prevented ice from releasing into tray

Replacement ice maker was plug in unit, only needed to remove one screw holding plastic plate that hid plug and wiring. Plugged it in and reattached plate with screw and done!

Parts Used: