This NSF-certified refrigerator water filter is engineered to improve the taste, clarity, and safety of your drinking water by reducing contaminants such as mercury, lead, and trace pharmaceuticals. D...
The interior light of your refrigerator is controlled by a switch that is activated when the door is opened and closed. If your refrigerator light will not turn on, there could be an issue with the sw...
This OEM-compatible screw is designed for use with many GE dishwashers. Measuring 8-16 HXW and 1/2" in length, this stainless steel screw secures the middle spray arm hub to the upper rack assembly, e...
This is a door handle fastener to secure the handle to your refrigerator drawer. It is also known and a mounting bolt or screw. It is approximately 1 inch in total length, and is made of metal.
Fix a freezer door that won’t close properly with this genuine spring hinge mullion. It keeps the flipper seal tight, preventing warm air from entering and helping maintain the right temperature. If y...
Need more space in your fridge door? This clear plastic bin is a great replacement for select GE, Hotpoint, and Café refrigerators. It’s gallon-sized, fits on the right-side door, and helps keep drink...
Get your GE refrigerator back to its peak performance with our GE Water Inlet Valve Assembly. This essential part is your solution to continuous functionality of your ice maker and water dispenser. It...
This LED light and cover assembly is designed for the fresh food compartment of compatible refrigerators, providing bright, energy-efficient illumination to help you easily see and access stored items...
Keep your refrigerator’s crisper drawer in top condition with this replacement vegetable pan glass. It offers a clear, durable surface for storing fruits and vegetables, and fits securely above the dr...
We've got just the right thing for your refrigerator troubles: the GE Stainless Steel Paddle Cover. This simple little piece is the backbone of your fridge's dispenser lever system. Have you ever ta...
Is your GE refrigerator in need of a little repair? Our Left Hand Ice Door Mid Bin is just what you need. Designed specifically for GE refrigerators, this sturdy bin fits neatly inside your refrigerat...
$72.93
Special Order
Questions And Answers for PFE28RSHESS
Ask our experts a question about this model and we'll get back to you as soon as possible!
3 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Jim
March 2, 2023
After drown out no power to fridge
For model number PFE28RSHESS
Hello Jim, thank you for your question. According to our research, you may need to check the following parts: the power cord, part number PS5135738, and the temperature sensor, part number PS304103. If they are not causing the issue, you may need to replace the control board, part number PS16619572. Good luck with your repair!
When the fan in the refrigerator was replaced my refrigerator started freezing. The technician then put in a motherboard. No change the previous fan was cleaned and replaced until a new one came in and it worked perfectly now. My fridge goes anywhere from 22 to 42 everything is frozen. Please help thank you.
For model number PFE28RSHESS
Hi Denise, thank you for getting in touch. Based on the description that you have provided, we would recommend checking the temperature sensor, part number PS304103, as it is most likely faulty and may need to be replaced. We hope this sorts out your problem!
My refrigerator is getting too warm. I've changed the thermistor in the ceiling of the fridge and next to the cooling coils. No change in behavior.
Then I changed the fresh food fan model WR60X35205, and no change in behavior.
When I adjust the temperature the fridge thinks it is the temp that is set. But when measured it is usually a few degrees off. Any suggestions on what to replace next? Thanks
For model number PFE28RSHESS
Hi Mark, thank you for reaching out. As you have already replaced all these parts, we would suggest checking the inverter control board, part number PS11721924. It operates by controlling the compressor depending on the temperature requirements, maintaining stable cooling and lowering energy consumption. We hope this sorts out your problem!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
I went to a GE repair center to explain my problem, the service center reccomended that I have a techinician come out o look at it. $75.00 for the visit and what ever labor and materials wuld cost.
I went on line to see if there were others having this same problem and found that there were many with the same problem.
After reading some of the ways that people found out what was wrong ...it became a matter of three components, the timer, heater or thermostat.
I tried the most common component and the less expensive one first , the thermostat switch I installed it very easily snipping two wires and attaching the news using wire nuts I used the diagram on this website to pinpoint the component and there has not been a problem since.
I applied some tips learned by reading other reviews. So before I started I grabbed my trusty vise grip pliers and a small screw driver. I locked onto the switch actuator, the part that the refrigerator door pushes in, with the vise grips and pulled on it just hard enough to get the screw driver inserted in the right side to push in the catch clip so the switch could be pulled out further each time the catch clip was depressed to the next detent. Then I used the screw driver on the left site to encourage the switch past the detents on the left and very quickly the switch was out of the mount. The wires from the refrigerator pulled out with the old switch. I unplugged the old switch from the wires and plugged in the new switch and shoved the new switch back into the mount, wiggled it a couple of times to make sure it was secure and the job was done. Once I applied the vise gripes at first, the whole job took less than a minute.
