Models > NTW4605EW0

NTW4605EW0 Amana Washer - Overview

Sections of the NTW4605EW0

[Viewing 6 of 6]
Keep searches simple, eg. "belt" or "pump".
Touch-Up Paint - White – Part Number: 72017
Touch-Up Paint - White
★★★★★
★★★★★
(16)
PartSelect #: PS385132
Manufacturer #: 72017
This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
$10.20
  In Stock
Order within the next 6 hrs and your part ships today!
Washer Drive Pulley – Part Number: W10721967
Washer Drive Pulley
★★★★★
★★★★★
(10)
PartSelect #: PS10057144
Manufacturer #: W10721967
This is a replacement clutch assembly or cam kit for your washer. The clutch assembly is mounted on the drive shaft on the bottom of your washer. You may need to replace the clutch assembly if the spl...
$69.34
  In Stock
Order within the next 6 hrs and your part ships today!
Drive Belt – Part Number: WPW10006384
Drive Belt
★★★★★
★★★★★
(5)
PartSelect #: PS11747978
Manufacturer #: WPW10006384
The main drive belt is designed to ride on the pulley until the basket gets up to speed.
$27.47
  In Stock
Order within the next 6 hrs and your part ships today!
Washing Machine Door Lock Assembly – Part Number: W11307244
Washing Machine Door Lock Assembly
★★★★★
★★★★★
(8)
PartSelect #: PS12704713
Manufacturer #: W11307244
$177.54
  In Stock
Order within the next 6 hrs and your part ships today!
Washer – Part Number: WP3949550
Washer
PartSelect #: PS11742027
Manufacturer #: WP3949550
This part goes on the agitator retaining bolt.
$9.81
  In Stock
Order within the next 6 hrs and your part ships today!
Shift Actuator - 6 Pin – Part Number: W10913953
Shift Actuator - 6 Pin
★★★★★
★★★★★
(4)
PartSelect #: PS11769864
Manufacturer #: W10913953
$84.49
  In Stock
Order within the next 6 hrs and your part ships today!
Hose Clamp – Part Number: WP285655
Hose Clamp
PartSelect #: PS11740613
Manufacturer #: WP285655
This hose clamp is sold individually.
$14.15
  In Stock
Order within the next 6 hrs and your part ships today!
Suspension Rod Kit – Part Number: W10780045
Suspension Rod Kit
★★★★★
★★★★★
(4)
PartSelect #: PS11703288
Manufacturer #: W10780045
$104.85
  In Stock
Order within the next 6 hrs and your part ships today!
SEAL-TUB – Part Number: W10324647
SEAL-TUB
★★★★★
★★★★★
(2)
PartSelect #: PS3407958
Manufacturer #: W10324647
$70.82
  In Stock
Order within the next 6 hrs and your part ships today!
Washer Drain Hose – Part Number: W11244231
Washer Drain Hose
★★★★★
★★★★★
(2)
PartSelect #: PS12578897
Manufacturer #: W11244231
The drain hose carries used water from the washer to your house drain.
$31.80
  In Stock
Order within the next 6 hrs and your part ships today!
PUMP-WATER – Part Number: WPW10661045
PUMP-WATER
★★★★★
★★★★★
(6)
PartSelect #: PS11757016
Manufacturer #: WPW10661045
$80.65
  In Stock
Order within the next 6 hrs and your part ships today!
STRIKE – Part Number: W10837741
STRIKE
★★★★★
★★★★★
(1)
PartSelect #: PS11726338
Manufacturer #: W10837741
$26.31
  In Stock
Order within the next 6 hrs and your part ships today!

Questions And Answers for NTW4605EW0

Ask our experts a question about this model and we'll get back to you as soon as possible!

39 questions answered by our experts.
  • 1
  • 2
  • 3
Sort by:
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Tony
January 27, 2020
I have a piece of a necklace sticking out from under the agitator, How do I lift the agitator out so as to remove this?
For model number NTW4605EW0
PartSelect logo
Hi Tony, Thank you for your question. To remove the agitator, you will first need to remove the dispenser cap on the top of the agitator and expose the bolt underneath. Then you will just need to remove the bolt and then pull up on the agitator to remove it. We hope this helps. Thank you and have a great day.

12 people found this helpful.

Was this helpful?
Thank you for voting!
Debbie
February 23, 2020
Washer won't start. No power comes on but there is power to the outlet that it is plugged in to.
For model number NTW4605EW0
PartSelect logo
Hello, Thank you for your question. You will want to check into the door latch and the knobs that you use to operate the machine. The lock will not allow the unit to start is there is a short or it is not reading the door is closed. That is part#PS12704713. We hope this helps, good luck with this repair.

5 people found this helpful.

Was this helpful?
Thank you for voting!
Brian
March 2, 2020
I just replaced the lid lock on my washer. Now that that is in it wont fill lid lock light wont come on. Do i have to unlock them when there new?
For model number NTW4605EW0
PartSelect logo
Hello Brian, thank you for your question. Yes, It is possible that the latch was engaged in the lock position and not allowing the strike to enter the latch assembly. If you disconnect the lock from the control while the unit is turned off, you can test the lock to see if it is in the locked state. If you test the blue wire to the white wire for resistance, if it reads 0 ohms then it is in the locked state. If it reads infinite, then the lock is in the open position. This will help to identify if the lock is in the locked position. If it is in the locked position contact customer service to return the part and a new latch should be ordered. I hope this helps.

3 people found this helpful.

Was this helpful?
Thank you for voting!
Lalo
December 23, 2019
6 year old Amana marking loud ratcheting sound .I replaced the worn cam and actuator , still having same problem. What else should i be looking for to replace .
For model number NTW4605EW0
PartSelect logo
Hello Lalo and thank you for writing. It certainly sounds like a faulty pulley PS10057144 and/or belt PS11747978 you should check for signs of damage, and replace it if needed. We hope this helps. Please contact us anytime.

3 people found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
Katherine
June 24, 2021
My spin cycle moves my machine all over and is very loud. I did all the trouble shooting. Can you help me?
For model number NTW4605EW0
PartSelect logo
Hello Katherine, Thank you for the question. If the appliance is shaking and moving, we suggest checking the Suspension Rods for damage or wear. We hope this helps!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
  • 1
  • 2
  • 3

Common Symptoms of the NTW4605EW0

[Viewing 11 of 11]
Will not agitate
Fixed by
these parts
Fixing Fixing Fixing
Show All
Leaking
Fixed by
these parts
Fixing Fixing Fixing
Show All
Spins slowly
Fixed by
these parts
Fixing Fixing Fixing
Show All
Will not drain
Fixed by
these parts
Fixing Fixing Fixing
Show All
Will Not Start
Fixed by
these parts
Fixing Fixing Fixing
Show All
Burning smell
Fixed by
these parts
Fixing Fixing
Show All
Spinning Issues
Fixed by
these parts
Fixing Fixing Fixing
Show All
Lid or door won’t close
Fixed by
these parts
Fixing Fixing Fixing
Show All
Shaking and Moving
Fixed by
these parts
Fixing
Show All
Locking Issues
Fixed by
these parts
Fixing Fixing
Show All
No hot or cold water
Fixed by
these parts
Fixing
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Noise on bottom of Washer louder as time went on. 1 1/2 years
Well, first investigated and found loose nut on drive clutch. First take off the two screws with nut drive then cover off using a screwdriver blade to snap off the cover. Then socket ratchet to take off the nut on drive clutch. take off belt by slowly rotating the drive gear. two screws that hold the electronics to the upper drive clutch and put aside, so you can snap off the cover for drive clutch on upper part with screwdriver and off the parts come and install whole unit back as took it apart. Line up the new upper clutch so that is position as was before. (Using parts diagram helps a lot as www. partsselect.com has for you or Maytag.com.) Then put the electronic part board back on and the gear and nut. Make sure it is tight by several attempts to make sure it's snugged up good and then slowly roll belt back on the pulley and motor drive. Put your cover guard back on with two screws and done.
Parts Used:
Drive Belt Washer Drive Pulley
  • Jerry from WALLA WALLA, WA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Screw drivers, Socket set
83 of 112 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Scratches in Surface
This product comes in a bottle with a brush like Liquid Paper. It goes on incredibly easy. A second coat might be needed. I wanted to prevent rust from setting in so I covered the scratches and dings. The paint is a little brighter since my washer is 10 years old but it still looks great.
Parts Used:
Touch-Up Paint - White
  • Michelle from Richardson, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
65 of 129 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Noise, grinding sounds. Wash tub stopped turning but motor and cycles kept functioning. Process of elimination, must be the clutch assembly.
Easy, just followed the repair video. Recommend also ordering the drive belt. Bought one locally during my repair.
Parts Used:
Washer Drive Pulley
  • David from BLOOMINGTON, IN
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers, Socket set
35 of 45 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!