N80CB Bostitch Nailer - Overview
Models starting with N80CB
Click on the best match to narrow your results.
Keep searches simple, eg. "belt" or "pump".
WASHER-RUBBER-7
PartSelect #: PS12504759
Manufacturer #: 854004
This rubber replacement seal is designed for use with select pneumatic and coil-fed nailers, providing a tight and reliable seal at the nose of the tool. Its primary function is to prevent air leakage...
$7.44
In Stock
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
would not fire nails
remove 2 Philips head screws, drive out drift pins with drill bit. Remove TVA6 replace with new TVA6 making sure TVA6 is completely seated and slots are aligned with drift pin holes! Drive in drift pins. Replace trigger and screws.
This did not solve the problem as suggested by Parts select.
Replaced Head Valve Seal...Problem resolved
This did not solve the problem as suggested by Parts select.
Replaced Head Valve Seal...Problem resolved
Parts Used:
-
Richard from Bogalusa, LA
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:30 - 60 mins
-
Tools:Pliers, Screw drivers
10 of 15 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!