This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
This drive hub kit (part number W10528947VP) is for washers.
Drive hub kit W10528947VP connects the spin basket to the spin shaft that spins the basket. The kit may include multiple parts; refer to...
This is a replacement clutch assembly or cam kit for your washer. The clutch assembly is mounted on the drive shaft on the bottom of your washer. You may need to replace the clutch assembly if the spl...
Ask our experts a question about this model and we'll get back to you as soon as possible!
36 questions answered by our experts.
< Prev
1
2
3
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Sheri
August 30, 2022
Suspension rod installation
For model number MVWC565FW1
Hi Sheri, thank you for reaching out. We have researched your model and attached a relevant video that will help you replace the suspension rod. We hope this helps!
8 people found this helpful.
Was this helpful?
Thank you for voting!
Christine
February 2, 2020
I’m trying to get the spin basket out so i can clean out the outer basket. I think it’s clogged up with gunk or something solid. I’ve gotten bolt out from agitator, but can’t get agitator off, to remove basket. Super frustrated!
For model number MVWC565FW1
Hello Christine, thank you for your question. Sometimes the agitator can get stuck to the shaft. You can try spraying some rust buster into the area where the bolt was, then using a ratchet strap or rope and shimmy it under the agitator to provide some leverage and pull on the strap to loosen the agitator. I hope this helps.
7 people found this helpful.
Was this helpful?
Thank you for voting!
Oscar
March 10, 2023
My machine shakes a lot. What is the parts the most of the time I need to be replaced because this problem?
For model number MVWC565FW1
Hi Oscar,
Thank you for your question. If your washer shakes and moves, there are some parts that you will need to check to see which one is causing the issue. We recommend checking the suspension rod supports, the leveling legs and the tub ring. We have included a link from our website that you may reference on how to check these parts. Once you have determined the part you need, please call customer service. We look forward to hearing from you!
Hello Marsha, thank you for your question. The board for this unit is PartSelect Number PS12347924. I hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
James
January 4, 2020
How do i run a diagnostic test to get trouble codes for this washer?
For model number MVWC565FW1
Hello James and thank you for writing.
For your convenience, we have attached the link to your service manual. We hope this helps. Good luck with your repair.
https://www.manualslib.com/brand/maytag/washer.html
We hope this helps. Please contact us anytime if you require further assistance.
Well, first investigated and found loose nut on drive clutch. First take off the two screws with nut drive then cover off using a screwdriver blade to snap off the cover. Then socket ratchet to take off the nut on drive clutch. take off belt by slowly rotating the drive gear. two screws that hold the electronics to the upper drive clutch and put aside, so you can snap off the cover for drive clutch on upper part with screwdriver and off the parts come and install whole unit back as took it apart. Line up the new upper clutch so that is position as was before. (Using parts diagram helps a lot as www. partsselect.com has for you or Maytag.com.) Then put the electronic part board back on and the gear and nut. Make sure it is tight by several attempts to make sure it's snugged up good and then slowly roll belt back on the pulley and motor drive. Put your cover guard back on with two screws and done.
ordered hub and it shipped quickly. I was able to put the hub in place and screw the screws in. you want to tighten them down slowly and go around to each screw tightening a little at a time so you don't break the hub. as you tighten the screws down the hub slides down flush. its impossible to just push the hub on with your hand. Buttoned it back up and got caught up on laundry. good day when the washer is fixed.
This product comes in a bottle with a brush like Liquid Paper. It goes on incredibly easy. A second coat might be needed. I wanted to prevent rust from setting in so I covered the scratches and dings. The paint is a little brighter since my washer is 10 years old but it still looks great.
