This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
This is a replacement clutch assembly or cam kit for your washer. The clutch assembly is mounted on the drive shaft on the bottom of your washer. You may need to replace the clutch assembly if the spl...
This front load washer cleaner removes odor-causing residue. Use it once a month and it will keep your machine fresh and clean. Package comes with 3 tablets.
The tub-to-pump hose carries the water from the tub to the drain pump. Unplug the washer and shut off the water supply before installing this part. Wear work gloves to protect your hands
This part is used to extend washing machine drain hose approximately 4 feet. You may also require the connector (PartSelect Number PS334663) to connect the extension to the existing drain hose.
Ask our experts a question about this model and we'll get back to you as soon as possible!
2 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Paula
January 17, 2023
My washer turns on by itself and tries to drain. If left plugged in it tries to drain for 5 minutes, shuts off for 5 minutes and then tries to drain for 5 minutes. This continues until unplugged. It also says code F3E2.
For model number MVW6230HC1
Hi Paula, thank you for reaching out. The F2E2 error code on your Maytag washer means there is a communication error between the main control board and the user interface control board. We suggest that you check the main control board, part number PS16555299, and the user interface control board, part number PS16221057. If you require assistance to place an order, please contact customer service. We hope that helps!
Hi my washer is about 1 1/2 yr old was running normal herd and saw pop flash and could smell burning now is totally dead what could caused this
For model number MVW6230HC1
Hi Tom, Thank you for writing. This could be an indication the User Interface Panel or Electronic Control are faulty and may need to be replaced. We hope this helps!
This product comes in a bottle with a brush like Liquid Paper. It goes on incredibly easy. A second coat might be needed. I wanted to prevent rust from setting in so I covered the scratches and dings. The paint is a little brighter since my washer is 10 years old but it still looks great.
Pushed in on door strike and rotated it counterclockwise, removed broken strike and installed new strike. NOTE: when removing the old strike (turning counterclockwise) it felt like it might break and/or was attached with an screw that I didn't see but it came right out.