If your washer is noisy, spins slowly, or leaves clothes soaking wet, this splutch cam kit might be the fix. It helps your machine switch between washing and spinning by connecting the motor to the ba...
$49.29
In Stock
Order within the next 7 hrs and your part ships today!
This suspension rod kit is a genuine OEM replacement kit that is compatible with various models of washing machine. The kit is responsible for supporting the inner tub of the washing machine and absor...
$137.05
In Stock
Order within the next 7 hrs and your part ships today!
Are you dealing with a faulty washplate in your washing machine? Meet the Whirlpool Washer Washplate Screw, your personal helper for securing loose or broken washplates. This genuine OEM part is highl...
$10.59
In Stock
Order within the next 7 hrs and your part ships today!
The tub-to-pump hose carries the water from the tub to the drain pump. Unplug the washer and shut off the water supply before installing this part. Wear work gloves to protect your hands
$42.76
In Stock
Order within the next 7 hrs and your part ships today!
Ensure your washer starts and runs efficiently with this start capacitor, which delivers the necessary electrical boost to initiate motor operation. Common symptoms of a failing capacitor include a wa...
$127.55
In Stock
Order within the next 7 hrs and your part ships today!
Questions And Answers for MVW4505MW1
Ask our experts a question about this model and we'll get back to you as soon as possible!
23 questions answered by our experts.
< Prev
1
2
3
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Amanda
September 7, 2025
Water dripping from top into basket constantly . What part do I need to replace
For model number MVW4505MW1
Hi Amanda, thank you for reaching out. It seems the water inlet valve is leaking, and you may need to replace it to fix the issue. The part number is PS16543460. We hope this information is useful!
Washer will only run cold water on all temperature settings. Had this problem before and suggested turning down hot water tank and did so. Now doing again.
For model number MVW4505MW1
Hi Cynthia, thank you for contacting us. We would suggest checking the hot water inlet hose for any blockage first. If it is fine, the issue could be with the water inlet valve, part number PS16543460. You may need to replace it to fix the issue. We hope this solves your problem!
Hi Randy, thank you for reaching out. Ensure that the water supply valves are fully open and that there are no kinks in the hoses. Check the water inlet valve for any fault as well. If it is fine, the issue could be the main control board, part number PS16763212. You may need to replace it to fix the issue. We hope this solves your problem!
i've replace the lid switch ,tart doing the diagnostic and it just got stuck in the middle of it.. just after checking infill valves, they worked.
the problem is that the lid is now locked and i'm not able to do anything. i have to mention that there was a water in the drum ...
For model number MVW4505MW1
Hello Marc, thank you for writing in. We recommend replacing the the lid switch PS17215992. The lid switch is a safety device that prevents the washer from agitating or spinning when the lid is raised. If it is faulty, the washer will not run. We hope this helps.
Washer will not drain have replaced the lid lock mechanism runs fine till it needs to drain an spin
For model number MVW4505MW1
Hi Roger,
Thank you for your question. If the washer will not drain, check the drain hose to see if is clogged or kinked. If it is clogged, clean or replace it and if it is kinked reposition it. If the drain pump is clogged or shows signs of damage, it will need to be replaced. We hope this helps!
Watched a video to get a general idea. Moved washer to garage. Raised lid, supported with s-hook and light chain. Front springs were easy, except no hole for the rod to hang in so used chain and small screwdriver through mounting hole. Back springs were not as easy. Finally removed the back panel to get to the rods. Bingo, much easier and only took 5 min to remove the back panel. reassemble and she works like a charm. Suggest to find a video reflecting your particular brand and model as all are similar but uniquely different. Easy project though.
Used video provided,but while reinstalling shocks pull the shock absorbers thru holes in washer deck using a stiff wire or a metal coat hanger will also work. This made installation so much easier!
