MSG27DHVAWH General Electric Refrigerator - Overview

Sections of the MSG27DHVAWH

[Viewing 6 of 6]
Keep searches simple, eg. "belt" or "pump".
Plastic Tubing - 5/16 Inch – Part Number: WR17X2891
Plastic Tubing - 5/16 Inch
PartSelect #: PS292878
Manufacturer #: WR17X2891
This part is the replacement water line for your refrigerator. It is a long plastic tube, which is 5/16 of an inch in diameter. If your refrigerator is leaking, or will not dispense water or ice, you ...
$47.57
  Special Order
Dispenser Door Assembly or Flapper – Part Number: WR17X11653
Dispenser Door Assembly or Flapper
★★★★★
★★★★★
(2)
PartSelect #: PS964304
Manufacturer #: WR17X11653
This ice dispenser door flap, also known as a damper door, is designed to seal the ice chute in compatible refrigerator models, preventing warm air from entering the freezer compartment. Constructed f...
$29.12
  Special Order
1/4 Tubing Nut – Part Number: WR57X57
1/4 Tubing Nut
PartSelect #: PS304401
Manufacturer #: WR57X57
$15.73
  Special Order
Upper Crisper Drawer – Part Number: WR32X1221
Upper Crisper Drawer
PartSelect #: PS300928
Manufacturer #: WR32X1221
  No Longer Available
Freezer Light Shield – Part Number: WR17X3489
Freezer Light Shield
PartSelect #: PS293386
Manufacturer #: WR17X3489
$45.95
  Special Order
Ice Storage Door – Part Number: WR17X10275
Ice Storage Door
PartSelect #: PS291480
Manufacturer #: WR17X10275
This is a decorative front cover that is made of plastic that covers the opening to where the icemaker is located and disables contact by the user while the icemaker is engaged.
  No Longer Available
Lower Crisper Drawer – Part Number: WR32X1222
Lower Crisper Drawer
PartSelect #: PS300929
Manufacturer #: WR32X1222
  No Longer Available
Screw – Part Number: WH2X930
Screw
PartSelect #: PS271689
Manufacturer #: WH2X930
This screw is sold individually.
$13.95
  Special Order
Plastic Tube - 1/4 Inch – Part Number: WR17X11349
Plastic Tube - 1/4 Inch
PartSelect #: PS758904
Manufacturer #: WR17X11349
$15.73
  Special Order
Dispenser Assembly Crank – Part Number: WR17X3089
Dispenser Assembly Crank
PartSelect #: PS293032
Manufacturer #: WR17X3089
$38.74
  Special Order
Water Tube and Grommet Kit – Part Number: WR17X3670
Water Tube and Grommet Kit
PartSelect #: PS293459
Manufacturer #: WR17X3670
This plastic water tube comes with the water dispenser spout.
  No Longer Available
Water Tank Assembly – Part Number: WR17X3105
Water Tank Assembly
PartSelect #: PS293048
Manufacturer #: WR17X3105
Also known as a reservoir. This tank stores water until the water actuator is activated and water is requested.
  No Longer Available

Common Symptoms of the MSG27DHVAWH

[Viewing 12 of 12]
Leaking
Fixed by
these parts
Fixing Fixing Fixing
Show All
Door Sweating
Fixed by
these parts
Fixing
Show All
Ice maker won’t dispense ice
Fixed by
these parts
Fixing Fixing
Show All
Not dispensing water
Fixed by
these parts
Fixing Fixing
Show All
Frost buildup
Fixed by
these parts
Fixing
Show All
Door won’t open or close
Fixed by
these parts
Fixing
Show All
Freezer section too warm
Fixed by
these parts
Fixing
Show All
Freezer not defrosting
Fixed by
these parts
Fixing
Show All
Ice maker dispenses too little ice
Fixed by
these parts
Fixing
Show All
Ice maker not making ice
Fixed by
these parts
Fixing
Show All
Fridge too warm
Fixed by
these parts
Fixing
Show All
Ice maker dispenses too much ice
Fixed by
these parts
Fixing
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
This seems to be a design problem because I have to replace this part about every other year since we bought it. I tried to talk to GE but all they want to do is send a service man out to replace the part for about 100.00, But I do it for around 15.00. I just think they should find out why the rubbe
The repair is easy, just pop the grill off around the ice and water door, then there are 4 screwws to take out so the touch pad can be moved out of the way to unsnap the old door assm. and snap in the new one and wait about a year and a hald to order another one!!!!!
Parts Used:
Dispenser Door Assembly or Flapper
  • Jeff from Columbia City, IN
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
26 of 35 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Flapper not sealing. Frost buildup on inside of freezer door
Followed previous instructions from a previous post. Inserted small screwdriver in the 2 outer holes up under the face plate to remove it then removed 4 screws holding the inner assembly which allowed access to the flapper assembly. Replaced it and reassembled everything. Problem solved
Parts Used:
Dispenser Door Assembly or Flapper
  • D from ZELLWOOD, FL
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
15 of 17 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
This replacement of the light shield was fast and easy. I wish they all good go this smooth.
I repaired as follows. 1) Open freezer door. 2)Removed ice maker bin. 3) removed screw with broken tab on it. 4) install new shield slide to side.
5) Reinstall screw. 6) Grab TAB (tasty adult beverage) and enjoy on back deck while talking about how good you are at repairing stuff.... HA!
Parts Used:
Freezer Light Shield
  • Stephen from Northglenn, CO
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
11 of 11 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!