This genuine Samsung glass cooking tray provides a stable, rotating surface for even heating inside your microwave. Made from clear, durable glass, it ensures consistent cooking performance and easy c...
This part is the replacement flat bolt for your microwave. It is a Phillips-head screw, which is approximately 4 inches long. The main reason to replace this bolt is if your current bolt is stripped, ...
This thermostat (part number DE47-20059B) is for microwaves. Thermostat DE47-20059B is a safety device that shuts off the microwave if it overheats. Because high-voltage capacitors in a microwave can ...
$22.80
Special Order
Questions And Answers for MMV5165BAS
Ask our experts a question about this model and we'll get back to you as soon as possible!
2 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Allen
September 9, 2023
Tray table moves constantly when door is open.
For model number MMV5165BAS
Hi Allen, thank you for contacting us. We have concluded that the issue is with the microswitch, part number PS11741686, as it is most likely faulty and may need to be replaced. We hope this is helpful!
Hi Allan, thank you for the question. Ensure that the door switches are working properly. If they are fine, the issue could be with the high-voltage capacitor, part number PS4130934. A shorted capacitor causes an immediate massive current draw when the heating cycle starts. You may need to replace it to fix the issue. We hope this sorts out your problem!
Why a tenant would remove and discard the grease filters without replacing them is beyond me! But, I removed the filters from the package and slid them into place. Two minutes tops. I would like to add that I ordered these on Thursday afternoon, and I had them on Saturday; awesome customer service!
Removed control panel, discharged HV capacitor. Removed old diode, tested to confirm failure. Replaced part. Other than the removal of the panel swapping the part was almost as easy as replacing a light bulb.
First I read through the customer comments, reviews, questions, etc. at Parts Select, which is always a good bet. Then I put "samsung microwave door switch replacement" into youtube and watched some videos. They don't even have to be for Samsung. From what I can tell, many of the appliance companies use the same design and the same junk parts, so watching a GE video is almost the same for example. Watch some videos to familiarize yourself with the steps. There are maybe six to disassemble and install the new part. I replaced all three switches. They are not expensive and to replace 3 is only 5% more work than to replace just one; you have to take the microwave apart in either case. UNPLUG THE MICROWAVE FROM THE WALL. Start taking it apart. I use my phone to take a picture of any thing I remove, unscrew or disconnect, especially wires, BEFORE I disconnect them. Thee pictures serve as a reference when I go to reconnect and reassemble. If I am uncertain then I check the picture. Good luck!
.gif "SUPPLEMENTAL INFORMATION Diagram and Parts List for Maytag Microwave")
