All Installation Instructions for Maytag Microwave MMV4205BAS17

Turntable stopped turning

I tried before to replace the coupler but ordered the wrong part from a different company. Your website allowed me to narrow down the search and choose the correct coupler from about 8 different choices.It took me literally 2 minutes to fix my turn table. I am a single mom with a disabled child, so the option of paying a repairman to fix my microwave was not an option. Thanks!

Parts Used:

Turntable Coupling

SALLY from LAGUNA NIGUEL, CA
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins

0 of 1 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

piece holding turntable plate broke off

strategically placed coupler in the hole and wallah! placed the plate back on it and watched her go around! Feel like a genius! lol

Parts Used:

Turntable Coupling

Dawn from Irene, SD
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

0 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

The original coupling holding turntable broke

Took the broken coupling out and put the new coupling in

Parts Used:

Turntable Coupling

Catherine D from Southampton, PA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

Was this instruction helpful to you?

Thank you for voting!

Turntable Not Turning

After contacting parts select they assisted me in ordering the correct replacement part. The folks I talked to on the phone WERE EXCELLENT in working with me to fix the issue. I has ordered a coupler that dammaged after a week of use and they replaced immediately telling me I had a year warranty! Great Company and Thank you it is working perfectly.

Parts Used:

Turntable Coupling

JOE from Grand Prairie, TX
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

Thank you for voting!

Rotating Tray fails to turn

Very easy. Opened the Microwave door, removed the dish and replaced the coupler.

Parts Used:

Turntable Coupling

JIM ODANIELL from WILMINGTON, NC
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

Thank you for voting!

tray would not rotate

Snapped the coupler in place. Took one minute.

Parts Used:

Turntable Coupling

Denise from Clovis, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

Thank you for voting!

The turntable on the Microwave stopped turning

Asked at Best Buy what our options were after I described the problem. They said to buy a new Microwave. I thought No way it is only a few years old. Whent home did som research and found your site and for under $5.00 My microwave turn table turns again!

Parts Used:

Turntable Coupling

Julie from Seattle, WA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

Thank you for voting!

Tray inside would not rotate

Removed old coupler with my fingers and installed new one on shaft. Works fine.

Parts Used:

Turntable Coupling

al from lexington, SC
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

Thank you for voting!

microwave acts like its working but won't heat.

Replaced the magnetron and diode. Microwave works prefect now.

Parts Used:

Microwave Magnetron

Mike from Paso Robles, CA
Difficulty Level:
Easy
Total Repair Time:
1- 2 hours
Tools:
Pliers, Screw drivers, Wrench set

Was this instruction helpful to you?

Thank you for voting!

Broken coupling on turntable

Just placed it in. Ordered, received in less than a week and it was working in minutes after being broken for 6 months Thank you!!!!!!!!!!!!!!!!!

Parts Used:

Turntable Coupling

Nanci from Boerne, TX
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

Thank you for voting!

the coupling was broken on my turntable

itt slipped right in, works great. thanks so much. If not for the reviews and no picture of the part, I would not have known what to order. thanks again

Parts Used:

Turntable Coupling

penny from akron, OH
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

Thank you for voting!

Microwave Vent Hood Filters

Not so sure this would qualify as "instructions", but I only needed a screwdriver because the "D" rings of the old vent filters broke off and I had to pry to old ones out. Keep in mind, I am mechanically disadvantaged and can barely change an A/C filter ... that being said, all I did for this order was input my Model number and PartSelect found the correct replacement part. I receive the parts super quick (faster than the other 2 purchases I did that day). The only bummer was the packaging ... super huge box for small tiny parts. Otherwise, I now know where to go for replacement parts. This project should be a "no-brainer" for most DYI's, so getting the right parts with just a model number was lifesaving for me :0)

Parts Used:

Grease Filter

Vicki from Phoenix, AZ
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

Was this instruction helpful to you?

Thank you for voting!

no power

took THERMOSTAT;NT-101NA,250 out and put THERMOSTAT;NT-101NA,250 in so easy got the part in LESS 19 HRS

Parts Used:

Microwave High Limit Thermostat

Glenn from Pedricktown, NJ
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers

Was this instruction helpful to you?

Thank you for voting!

Table Will Not Spin

Try to turn Coupler. If it is loose it is broken 1. pull old one out 2. line up keyway on new one and press it in. (If mild resistance was felt while turning coupler it is not coupler most likely drive motor)

Parts Used:

Turntable Coupling