This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
This front-load door hinge is a genuine replacement component designed to support the door on compatible washers and dryers, ensuring smooth and secure pivoting during opening and closing. Constructed...
This hose clamp extends from half an inch to an inch in diameter. It is made entirely of metal and is intended for use with Maytag brand washing machines.
If your front-load washer is leaking or making strange noises, this door boot seal might be the fix. It creates a tight seal between the door and the tub to keep water and detergent inside during the ...
Having a problem with a funky-smelling washing machine, or one that just doesnt seem to clean your clothes as well as it used to? Say hello to the Affresh Washing Machine Cleaner by Whirlpool. This po...
Upgrading your laundry room? We can help you save space effortlessly with our Whirlpool Long Vent Dryer Stack Kit. Designed specifically for certain Whirlpool, KitchenAid, Maytag, Jenn-Air, Amana, Ing...
Note: This part has been updated by the manufacturer. It may appear different but will still function the same as the original.
$13.00
In Stock
Questions And Answers for MHW6630HW0
Ask our experts a question about this model and we'll get back to you as soon as possible!
13 questions answered by our experts.
< Prev
1
2
3
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Amy
January 13, 2023
I only need seal( gray rubber piece because part of rubber is ripped and water leaks out. There is always puddle on floor. What’s actual order piece. I don’t need everything like they show
For model number MHW6630HW0
Hello Amy, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is PS12711495. Good luck with your repair.
Hello Roy, thank you for reaching out. When the washer is not able to drain, the spin cycle will not start. We would recommend checking the drain hose and ensuring that it is not clogged or kinked. The issue can also be related to a faulty drain pump, part number PS16218041. It removes water from the washer during the drain portion of the cycle. Customer service is available seven days a week if you require assistance placing an order. Thanks again for reaching out!
Hello Debra, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is PartSelect Number PS12711495. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
WILL NOT POWER UP. GETS POWER TO THE DOOR LOCK HAS A ERROR CODE F6 E2
For model number MHW6630HW0
Hello Ronald, thank you for reaching out. Our research shows that the error code F6 E2 indicates a problem with the washer control, user interface, or wiring. We would recommend checking the following parts to fix your issue: wire harness, part number PS12717343, console, part number PS12711863, and control board, part number PS12711864. If you require assistance to place an order, please contact customer service. We hope that helps!
Hi Roy, thank you for the great question. 5d is actually error Sd and it means "suds". Either way, it stands for "suds," meaning that your washer does not think it can drain the water out. So if you are sure there are not too many suds in the tub, you need to pull the washer out and remove the back access panel. The drain pump is mounted to the floor below the tub, so unplug the washer and remove the drain pump. Be careful, because all the water inside the tub will come pouring out if there is any. Clean out the drain pump if you find anything inside. Now you have a few scenarios. If you can see no water in the tub and you are sure there aren't too many suds, then your pressure switch, part number PS12711555, is failing and needs to be replaced. If you drain out all the water that is in the tub and the washer begins to work but the error comes back and you're sure the drain is clear, then you need to replace the drain pump, part number PS16218041. Customer service is available 7 days a week if you require assistance placing an order. Thanks again for reaching out!
.
Using the Torx Screwdriver, we removed the door from the unit. Then we removed all of the screws on the inside of the washer door. After that we flipped it over and opened it up exposing the inside. We couldn't separate them entirely because there was a screw under the latch piece that we couldn't figure out how to get to. However with all the screws out on the inside of the door, we did have enough room to open it up and access the place cover that holds the hinges in. Once we accessed that we removed the roller tips from the old unit and placed them on the new one. Then we reversed the process. With a couple screws in we realized we had put the hinge in reversed from what it needed to be, so we reopened it and switched it around. Then completed replacing all the screws and reattached it to the washer. It opens and closes perfectly and we saved a couple hundred dollars for sure, as the quote to come out had been a $150 trip charge.
Replaced the Whirlpool washer water inlet valve. 1. Unplug washer 2. Close Hot and Cold water valves 3. Remove top cover of the machine by taking out 3 screws in the top back. Slide top back and remove. 4. Water Inlet Valve is located on the back left side, remove tubing using a nutdriver to loosen the hose clamps. 5. Water Inlet Valve is removed by removing the screw in the back of the valve and turning the valve clockwise a little. Replace with the new one, connect hoses, put cover back on, open valves, plug it in. 6. Ran washer and Fabric Softener dispenser now works
This product comes in a bottle with a brush like Liquid Paper. It goes on incredibly easy. A second coat might be needed. I wanted to prevent rust from setting in so I covered the scratches and dings. The paint is a little brighter since my washer is 10 years old but it still looks great.
