Models > MEC5536BAB > Instructions

MEC5536BAB Maytag Cooktop - Instructions

All Instructions for the MEC5536BAB
106 - 108 of 108
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
burner not as hot as it should be
I unplugged the stove and removed two screws on bottom of stove top (above oven door) one screw holding burner bracket in place. Took one wire off at a time and hooked to new burner, tightened all screws back down.
Parts Used:
Element with Limiter 6 Inch - 1200W
  • Joel from Dillon, SC
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Pliers, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
wrong color knobs
Pulled he old ones off and on with the new ones and must say they are very nice looking..
Parts Used:
Range Burner Control Knob
  • Sheila from Picayune, MS
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
1200 watt r/rear burner element has an opening in the elementg
Shut off 220 volt power to range. Removed two screws for cooktop element access. Used needle-nose pliers to remove power (2) and control (2) lugs and wires. Remove defective cooking element module, replaced. Reverse steps for new unit.
Parts Used:
Element with Limiter 6 Inch - 1200W
  • Jayson from Cape Coral, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the MEC5536BAB
106 - 108 of 108
Back to Top