LYC123ALA36 LG Air Conditioner - Overview
Sections of the LYC123ALA36
[Viewing 1 of 1]
Keep searches simple, eg. "belt" or "pump".
Cross Flow Fan Assembly
PartSelect #: PS3528648
Manufacturer #: 5901A20050A
The cross flow fan assembly, also known as a evaporator fan blade, works in conjunction with your air conditioner by blowing air through the evaporator to cool the air. If your air conditioner is maki...
No Longer Available
BEARING
PartSelect #: PS12075835
Manufacturer #: 4280A20004M
Tired of the sweltering heat because your air conditioner isn't working as it should? Don't worry, we've got you covered. You need the LG Air Conditioner Blower Wheel Heat Pump Bearing. This is not ju...
$25.95
In Stock
Order within the next 1 hr and 48 mins and your part ships today!
FILTER,AIR
PartSelect #: PS12747807
Manufacturer #: 5230A20021E
This is a genuine LG air filter sourced directly from the manufacturer. It is designed for your LG air conditioning unit, and prevents dirt, debris, and other airborne particles from entering your hom...
$59.35
In Stock
Order within the next 1 hr and 48 mins and your part ships today!
Room Air Conditioner Fan Bracket
PartSelect #: PS3524525
Manufacturer #: 4960A20005A
$46.15
Special Order
Fan Motor
PartSelect #: PS3523199
Manufacturer #: 4681A20064N
If you're dealing with an air conditioner that's not cooling as it should, this Indoor Fan Motor Assembly from LG might be just what you need. Designed by LG, a brand trusted worldwide, this genuine O...
$204.86
Special Order
Common Symptoms of the LYC123ALA36
[Viewing 1 of 1]
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Blower fan motor
Blower fan motor not working. Partselect representative he guide me. Make sure new motor diameter is wide. Purchase motor with mounting bracket. Old motor bracket will not working . my Ptac after installing new motor running smoothly.
Parts Used:
-
Nimesh from Urbana, IL
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver, Pliers, Screw drivers
3 of 4 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Motor mount broke due to imbalance caused by mud dobber nests.
Pulled PTAC out of wall sleeve, unhook wire harness from control area, remove condenser shroud and motor and fan blade all at the same time. Replaced motor bracket and re-installed in reverse order.
Parts Used:
-
Travis from LOUISVILLE, IL
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver, Screw drivers
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!