Models > LSD4913ST

LSD4913ST ((ASTLLGA)) LG Range - Overview

Sections of the LSD4913ST

[Viewing 6 of 6]
Keep searches simple, eg. "belt" or "pump".
Temperature Sensor – Part Number: EBG61305805
Temperature Sensor
★★★★★
★★★★★
(4)
PartSelect #: PS11732697
Manufacturer #: EBG61305805
$111.65
  In Stock
Thermostat – Part Number: 6930W1A003X
Thermostat
★★★★★
★★★★★
(3)
PartSelect #: PS3530468
Manufacturer #: 6930W1A003X
$31.73
  In Stock
FOOT – Part Number: 4778W1N001B
FOOT
PartSelect #: PS3635599
Manufacturer #: 4778W1N001B
$22.95
  In Stock
Window,Glass – Part Number: 4890W1N005A
Window,Glass
★★★★★
★★★★★
(1)
PartSelect #: PS3524129
Manufacturer #: 4890W1N005A
$211.63
  In Stock
HEATER,SHEATH – Part Number: MEE62306504
HEATER,SHEATH
PartSelect #: PS12582157
Manufacturer #: MEE62306504
$164.79
  In Stock
MOTOR,AC FAN – Part Number: EAU62343001
MOTOR,AC FAN
★★★★★
★★★★★
(1)
PartSelect #: PS11761138
Manufacturer #: EAU62343001
$178.89
  In Stock
Oven Rack – Part Number: MHL63411403
Oven Rack
★★★★★
★★★★★
(1)
PartSelect #: PS11761984
Manufacturer #: MHL63411403
$177.94
  In Stock
BURNER – Part Number: MBE62002902
BURNER
PartSelect #: PS11775890
Manufacturer #: MBE62002902
$84.63
  In Stock
TRANSFORMER ASSEMBLY,POWER – Part Number: EBJ64465501
TRANSFORMER ASSEMBLY,POWER
PartSelect #: PS16732632
Manufacturer #: EBJ64465501
The spark module controls the spark for lighting the cooktop surface burners.
$71.70
  In Stock
Thermostat – Part Number: 6930W1A003J
Thermostat
PartSelect #: PS3530463
Manufacturer #: 6930W1A003J
$14.38
  In Stock
Common Nut – Part Number: 1NHB0500032
Common Nut
PartSelect #: PS3517437
Manufacturer #: 1NHB0500032
$10.42
  In Stock
Screw,Taptite – Part Number: 1SBF0402418
Screw,Taptite
PartSelect #: PS3517460
Manufacturer #: 1SBF0402418
$10.42
  Special Order

Questions And Answers for LSD4913ST

Be the first to ask our experts a question about this model!

Common Symptoms of the LSD4913ST

[Viewing 6 of 6]
Little to no heat when baking
Fixed by
these parts
Fixing Fixing
Show All
Oven not heating evenly
Fixed by
these parts
Fixing Fixing
Show All
Element will not heat
Fixed by
these parts
Fixing Fixing
Show All
Won’t turn on
Fixed by
these parts
Fixing Fixing
Show All
Oven is too hot
Fixed by
these parts
Fixing Fixing
Show All
Door won’t open after self cleaning cycle
Fixed by
these parts
Fixing
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Replace Inner Oven glass because it shattered
Go onto youtube, such as https://www.youtube.com/watch?v=-ITkrwhDNMQ and watch similar videos for DYI. The process is very similar to other models.

Once the door is removed, place oven door on a towel or soft place so it does not scratch the door. Unscrew the screws and make sure you notice where each screw goes, so you know the process of where each screw goes when you re-assemble.

Once the inner cover is removed, remove the insulation, too so you don't damage it. Use Wet/Dry Shop Vac to clean the shattered glass. (WORD OF ADVICE: I did not remove the insulation and the suction of the Shop Vac removed part of the insulation, so now instead of a quick turn around repair turns into a few weeks repair, because the insulation is on back order 10-14 days from the supplier. DON"T MAKE THE SAME MISTAKE!)

Once the glass has been removed, the new inner glass is replaced, begin by re-assemble the oven door with the correct screws and attached the oven door to the range.

Hope this helps
Parts Used:
Window,Glass
  • Jeffrey from CERRITOS, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
9 of 15 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Convection Fan stopped working, would spin but not continuously on its own
Unplugged oven electric and turned gas off. Removed all back covers from the unit. Removed the cover on the inside covering the burner and fan in the back of the convection oven. Removed the nut securing the fan to motor shaft with helper holding the motor. Removed the three electrical wires attached to motor, making note where they go. Removed screws mounting the motor to oven. Removed motor cooling fan and shaft spacer from old motor. Fit in same orientation on new motor. Replace all parts in reverse order, restore gas and electric, turn on and test.
Parts Used:
MOTOR,AC FAN
  • Barry from PIERRE, SD
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Screw drivers
6 of 9 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The Microwave was completely dead and wouldn't run, light up or anything.
I followed an old appliance repair forums post from 2008 that discussed this exact common issue with this LG model. It took me quite a while to find the info. Then I used the schematic diagrams on your website to find where the part was located inside the microwave. I removed the outer cover. I tested all components including the thermostat for continuity with a multimeter. I discovered there wasn't any continuity in the thermostat so ordered the part and replaced it. Everything works like a charm! Thanks for the great, fast service.
Parts Used:
Thermostat
  • Christopher from SHERWOOD, OR
  • Difficulty Level:
    Easy
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Pliers, Screw drivers
3 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!