This temperature sensor, also referred to as a thermistor, is a genuine replacement component compatible with various appliance models. It works in coordination with the control board to monitor inter...
$103.87
In Stock
Order within the next 3 hrs and your part ships today!
This gas range oven igniter is compatible with various models of LG gas ranges. It is made up of the igniter element, wire harness, connector and mounting bracket. The igniter is responsible for gener...
$346.52
In Stock
Order within the next 3 hrs and your part ships today!
The burner cap attaches to the top of the burner head and acts like a cover for the burner head. This part helps to protect the burner from spills and helps to even the flame while cooking. The cap is...
$90.41
Special Order
Questions And Answers for LRG3095ST
Ask our experts a question about this model and we'll get back to you as soon as possible!
4 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Kathy
September 1, 2022
My 2015 LG gas range is overheating no matter what temp I set it to. Do you know what I can do for this? ie: no matter what temp oven is set to, it heats to 400+ degrees.
For model number LRG3095ST
Hello Kathy, thank you for your question. The overheating of an oven can be due to is a damaged or loosened thermostat knob. Or, it may be the Thermostat PS11732697 inside your oven as it measures and regulates the heat to ensure that the oven cooks at a consistent temperature without getting too hot.
If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you.
Hello Linda, thank you for reaching out. The wire harness you are looking for is part number PS3533415. If you require assistance to place an order, please contact customer service!
Hello Larry, thank you for contacting us. The hinge assembly you are looking for is part number PS3617183. If you need help placing an order, customer service is open 7 days a week!
Hi William, Thank you for writing. The F11 error code on an LG gas range could indicate a faulty igniter. Other potential causes include a stuck button on the control panel or a faulty temperature sensor. We hope this helps!
Took off the oven door then took out the racks and two screws in the oven bottom and removed it . Then removed the heat deflector. Then un plugged the old igniter and removed the burner to make it easier to remove the old igniter. Then installed the new igniter and reversed the process
As soon as my husband put it in the oven, the very thin prongs broke. There was no guard on either side of the prongs for protection like the one that had been in there. Very costly to us of $185 with no fix. Very disappointed in that ignitor. It would have been an easy fix. Had replaced one previously but it only lasted 6 months. Now we have a new stove
i removed the oven door by lifting the safety latches on each hinge and gently lifted the door off. once off i could access the 2 large phillips head screws and loosened and removed them. then i simply slid out the old and slid in the new & reversed the process.
