This is replacement vent grille or vent grill for your microwave. You will find the grill vent either above or below the microwave door, depending on your model. If your vent grill is discolored or cr...
This is an authentic LG charcoal filter for your microwave, sourced directly from the manufacturer. It is designed to remove odors from the air that circulate through your microwave vent. It measures ...
This catch lock is designed for use with slide-out microwave oven hoods and plays a crucial role in securing the hood in place. If the lock is broken or malfunctioning, it may prevent the microwave do...
This bracket holds the metal or plastic flapper that closes off the exhaust duct when the fan is not running and opens when the fan turns on. If the exhaust fan on your microwave does not appear to be...
This metal vent damper door closes off the exhaust duct when the fan is not running to stop outside air from entering the microwave unit, and opens when the fan turns on to allow air to vent away from...
This part is the replacement base plate trim, also known as the front décor for your microwave. It is gray in color and is approximately 30 inches long and 1 ½ inches wide. The base plate trim forms a...
$143.72
In Stock
Questions And Answers for LMHM2237ST
Ask our experts a question about this model and we'll get back to you as soon as possible!
15 questions answered by our experts.
< Prev
1
2
3
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Cntrysthbst
March 10, 2023
Won’t finish Popcorn issue, F4 - open humidity sensor, do you carry the humidity sensor for this model?
For model number LMHM2237ST
Hi, thank you for reaching out. Based on our research, the humidity sensor, part number PS3529192, is compatible with your model. You can replace it to sort out your problem. We hope this helps, good luck with this repair!
The plastic washer holding the door handle on the microwave has broken. Can I get a replacment door handle,and washer?
For model number LMHM2237ST
Hello Maria, Thank you for your inquiry. Researching the model number that you have provided, we show the handle as part# PS11711871, which is held onto the outer door frame by two screws, part# PS3534414-sold individually. Good luck with your repair.
Microwave works but no display. Appears to be a door switch problem. Have any suggestions?
For model number LMHM2237ST
Hello Jerry, thank you for contacting us. We have researched the model you have provided and have found that the part you are looking for is part number PS12076925. If you would like assistance placing an order, please contact customer service. Good luck with your repair!
Was this helpful?
Thank you for voting!
Kirk
October 28, 2022
Hi!
I ordered from you in the past and am very satisfied with everything. Cost, shipping time, easy web interface for part searches, and how you have your part photos laid out on the grid background. That gives everyone and idea of the size. Great work!!
The little black tabs (4 in total) that hold the metal tray up are what I'm looking for today. I only need one tab and cannot locate them on your website. Is there a part number you can send?
Thanks so much for the great work and amazing service!
aka "Another satisfied customer"
For model number LMHM2237ST
Hello Kirk, Than you so much for your comments and question. We see that there are (4) four Microwave cooking rack supports. Left are PS11711938 and PS12079071. The Right are PS1170606 and PS11711939. We hope this helps
Was this helpful?
Thank you for voting!
Judy
November 3, 2022
The plastic ring with wheels that support the glass plate needs to be replaced. The wheels keep falling off. This measures 9.5 but the largest I've seen anywhere is 8.8. Please send me the part number, it is not listed in the owners manual.
For model number LMHM2237ST
Hi Judy,
Thank you for your question. The part number listed under your model number for the turntable assembly is PS3528550. If you need help placing an order for it, customer service is open 7 days a week and anyone will be happy to assist you. Please feel free to give us a call. We look forward to hearing from you!
After watching a few youtube videos, I used a phillips SD to take controll pannel off to access the switches that sense when microwave door is closed. Swapped out all 3 switched and mocrowave works like new. $20 fix (shipping included)
Unplug the unit before servicing. Need phillips screwdriver. Open door. Use step ladder to access and remove 2 small screws from top of the room air diffuser at top of unit. Slide diffuser slightly to the left to align the diffuser's plastic tab on the left side to rotate toward you. (The wires for the front control panel are at the far left side of this difuser, but difuser is slotted for easy removal). Once the difuser is removed you will see 1 screw at the top that secures the pannel cover on the left side of the unit. Remove screw and slide this panel slightly up and out. This exposes the plastic frame that holds the upper and lower door switches. To locate the door switches and observe how they work, close and open the door and watch the door (bayonets) open and close the micro switches. Do the (red) buttons on top of the switches move up and down when the door bayonets push and release? If the buttons do not "pop" up when opened the switch is defective. The switch frame is secured with 2 screws. Remove screws and rotate the unit out for easy access to the micro switch(s). The internal (spring?) on my unit that is suposed to allow the red (visible) button on top of the switch to "pop" up when the door is opened was broken. Carefully pry the switch outward while being careful to lift the plastic holder-piece that holds the switch in place. Be careful, there is a small pin on the frame, so rotate the switch OUT toward you while lifting (carefully) the plastic holder-piece (you will see it on top of the switch). You can use an ohm meter to test the continuity of the switches. But if the buttons don't "pop" they are defective. Replace switch and reassemble.
Leave the unit installed. Remove 8 screws, 4 on each side of the bottom of the drawer. It is hinged on the back but front will drop down. Remove screws attached to the white slide rails but hold bezel assembly so the spring metal on each side do no break. Look in assembly from the back to front. With a long Phillips remove the screws holding the bezel on. 3 screws. Remove old Bezel. Put new on and reassemble using the reverse.
