Ask our experts a question about this model and we'll get back to you as soon as possible!
5 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Richard
September 18, 2022
I need a price for a magnetron, they did a phone diagnosis and said it was burned out or the connection was bad
For model number LMC2075BD
Hello Richard, thank you for your question. We have researched your model and found that the part number of the magnetron is PS12383382, all pricing is listed on our website. If you need help placing an order, customer service is open 7 days a week. Thanks again for your great question.
2 peoplefound this helpful.
Was this helpful?
Thank you for voting!
Henry
May 4, 2023
Not heating up
For model number LMC2075BD
Hi Henry, thank you for reaching out. Based on our understanding of the issue, we would suggest you check the magnetron, part number PS12383382, as it is the most likely cause of this issue. If it is faulty, you may need to replace it. We hope this solves your problem!
The button on my microwave to open the door seems to be broken . Is there a part available to fix this problem? My research tells me it might be a spring. It’s only 3 years old and has been like this for a year. Please advise
For model number LMC2075BD
Hi Joe, thanks for contacting us. The Door Release button assembly is PartSelect Number PS12370528. If you are looking to purchase this part then you can do so by either adding it to your cart and going through the checkout process online, or by calling our customer service line and ordering with one of our agents. I hope that helps. Good luck with your repair.
My 8 year old daughter cleaned the inside of the microwave with enough water to rival a tsunami. Resulted in a clean microwave with a fried out motor that no longer revolved. Part came quickly. Took cover and bottom off to get to the part. One screw held it on and a plug. Removed those, put on new part and she was good to go. No trip to home depot today.
Note: also had to replace turntable. Removed top cover using secure driver set. Placed microwave on it's front, using a soft towel. Removed edge screws from bottom plate (leaving 4 screws in center attached to heavy transformer). Separated bottom plate from body of microwave (leaving transformer wires still attached) exposing Synchronous motor. Removed two screws holding motor and electrical plug. Swapped new motor in its place. Re-attached bottom plate with its screws. Placed microwave onto it normal position. Re-attached top cover with its secure screws. Installed new turntable inside.
