The dishwasher roller assembly connects to the dishrack, and is located in the lower level of the dishwasher. It allows the dishrack to easily slide in and out. If the lower rack keeps falling off the...
This part is the replacement inlet valve for your dishwasher. It is approximately 4-1/2 inches by 3-1/2 inches. The water inlet valve in your dishwasher connects to the water source and solenoid wire...
Ask our experts a question about this model and we'll get back to you as soon as possible!
3 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Dan
November 14, 2023
My dishwasher has no power the cord and the outlet are fine and it ran last night.
For model number LDFN343LS
Hello Dan, thank you for writing. First check that the circuit breaker was not tripped. Ensure the control lock is deactivated. Check fuse if this unit has one. If all these check out, then it may be the Dishwasher Electronic Control Board PS16551757. We hope this helps.
i have no power at control panel, i have power at outlet and at junction where the cord comes in. We had recent thunderstorm could be voltage surge. Is there a surge protector?
For model number LDFN343LS
Hi Ryan, thank you for the question. We have concluded that the issue is with the control panel assembly, part number PS16547372, which may need to be replaced. We hope this helps!
I NEED A DOOR LATCH FOR THE DISHWASHER WITH THE MODEL NUMBER LDFN343LS.
For model number LDFN343LS
Hi Willie, thank you for your inquiry. The part you are looking for is the door latch assembly, part number PS12580257. Please submit a new question if you have any follow-ups!
This was my first time repairing a dishwasher. I watched YouTube on how to remove the dishwasher from the cabinet. Afterwards, I removed the bottom of the dishwasher while it was laying flat to get to the motor and micro switch. The only difficulty I had was getting to the motor which required taking the bottom section off of the dishwasher. I could not get an appliance repair company to work on an LG dishwasher. My only option was to repair the dishwasher or bought a new dishwasher. Therefore, my wife and I decided to , make an attempt to repair this one with a backup plan of buying a new one. Luckily, we were able to fix this one within two hours.
This was a $999 dishwasher. We saved the cost of a new dishwasher by taking the time to fix this one.
Ordered the roller from Parts Select, slid the roller over the little spindle sticking out of the bottom rack and snapped it in place. Job done in less than one minute.
Was not able to see where the Stopper, Rollers ( Part # PS3523062) could be attached to the back of the bottom tray, to fix the problem. So the parts were useless.