This temperature sensor, also referred to as a thermistor, is a genuine replacement component compatible with various appliance models. It works in coordination with the control board to monitor inter...
Ask our experts a question about this model and we'll get back to you as soon as possible!
1 question answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Michelle
December 27, 2024
My Single burner is not working anymore I guess I'm saying it right the book says dual /single element the light is on it's saying Hi but it's not turning red quickly I think the heating element may have burn out
For model number LDE3037ST
Hello Michelle, Thank you for your inquiry. It could be an issue with the element, or the wiring. For your model, the two single elements are at the left rear and right rear, and we show the part number as PSPS7795470. We also recommend checking the wiring harness for any loose connections or visible damage. Good luck with your repair.
Dropped a hammer on the range while removing a ceiling light. Viewed a How-To video on Google. Ordered the needed parts. Followed the steps from the How-To video. Reinstall was a bit tricky by myself - could have used an extra set of hands. I have a few words of caution: 1) Put something between the range top and range - like a sheet or drop cloth - to prevent a dropped screw from falling into a crevice in the stove. I dropped a screw and was unable to retrieve it, even with a magnet. 2) Makes sure you remove all bumpers, screws, clips, etc. from the item being replaced and put them on the new item if the new item does not come with replacement bumpers, screws, etc.
Replaced the control board, part number EBR64624601. Took the back off the oven, removed the screws the held the board in, put the new board in and replaced the back. The LG range is a double oven with the bottom oven both convection and regular heat element. Problem started after using the self-cleaning feature.
We had made this determination with the help of a repairman on the phone. I ordered the part and waited for it. It was stuck in West Virginia. After several days after it was expected a repairman fixed my range to the tune of $168. It should have cost $30 (the cost of the part and shipping). Unfortunately I probably won't order from PartSelect again.
