This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
$15.95
In Stock
Order within the next 12 hrs and your part ships today!
This is a light switch for your refrigerator. It activates when the door of your appliance is opened, and it will turn the light inside on and off. You will need to replace this part is if your light ...
$38.09
In Stock
Order within the next 12 hrs and your part ships today!
If your fridge is making too much ice or it’s melting too fast, the temperature sensor in the ice bin might be the issue. This small part keeps track of the bin’s temperature and tells the fridge when...
$76.95
In Stock
Order within the next 12 hrs and your part ships today!
This fan motor is most times used with frost-free refrigerators with a condenser coil. When the compressor runs, so does this fan, circulating air through the refrigerator grille, cooling the compress...
$100.87
In Stock
Order within the next 12 hrs and your part ships today!
The water inlet valve is a crucial component in ice makers, responsible for supplying water to the reservoir for ice production. It regulates water flow and ensures a consistent supply, preventing lea...
$225.48
In Stock
Order within the next 12 hrs and your part ships today!
Ask our experts a question about this model and we'll get back to you as soon as possible!
1 question answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
David
October 19, 2022
But new pump,new contor board, new transformer. Trun on ice maker pump came on,it work . It worked. Shut off , drained water but cleaner in turned back on ,pump will not come back on.
For model number KUIX535HBS00
Hello David, thank you for your question. We would recommend checking the wiring of the pump, part number PS12114461, and looking for loose connections. Sometimes due to a problematic wire harness, the pump may not work. Customer service is always available to help you place an order if you are having trouble doing so. Good luck with your repair.
This product comes in a bottle with a brush like Liquid Paper. It goes on incredibly easy. A second coat might be needed. I wanted to prevent rust from setting in so I covered the scratches and dings. The paint is a little brighter since my washer is 10 years old but it still looks great.
The water filled on startup (actually over-filled, which was a clue). After that water was used to make ice, no new water came in so the recirculation pump just made whining noises in the mostly empty reservoir. Since water could come in (on start up) I reasoned it wasn't the water inlet valve, and everything else suggested the ice maker was getting inaccurate info about how much water was in the reservoir. Turns out, the water recirculation pump has a water level sensor built in. So while the pump itself still functioned, the water level sensor inside had gone bad. Replacing the pump fixed the issue. There are videos online that show how to accomplish that, but it was pretty straight-forward. The dis-assembly was sometimes irritating because it's hard to see and maneuver around inside. It'll help if you put the machine closer to eye level. Pay close attention to videos that show the disassembly because there are a couple of tabs that are hard to find.
