This water filter is a genuine OEM replacement component designed for use in select refrigerators and freestanding ice makers. Engineered to remove contaminants and particles from the water supply, it...
This is a light switch for your refrigerator. It activates when the door of your appliance is opened, and it will turn the light inside on and off. You will need to replace this part is if your light ...
If your fridge is making too much ice or it’s melting too fast, the temperature sensor in the ice bin might be the issue. This small part keeps track of the bin’s temperature and tells the fridge when...
This fan motor is most times used with frost-free refrigerators with a condenser coil. When the compressor runs, so does this fan, circulating air through the refrigerator grille, cooling the compress...
The water inlet valve is a crucial component in ice makers, responsible for supplying water to the reservoir for ice production. It regulates water flow and ensures a consistent supply, preventing lea...
The circulation pump is an essential component of select ice makers. It continuously circulates water over the evaporator plate, allowing ice to form into a solid slab before being cut into cubes. Thi...
This drain pump helps your ice maker stay dry and work smoothly by clearing out extra water after each cycle. It kicks in automatically to remove water from the reservoir, stopping leaks and puddles b...
This Refrigerator Ice Maker Installation Kit connects the house water supply, to the refrigerator for ice maker and water dispenser operation. This kit includes 15-ft of copper tubing, (1) saddle valv...
$53.85
In Stock
Questions And Answers for KUID308HPS02
Ask our experts a question about this model and we'll get back to you as soon as possible!
1 question answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Julia
July 10, 2026
My Ice maker is making thin ice. It states to order cleaner. Where do I find it and how do I clean it?
For model number KUID308HPS02
Hello Julia, thank you for the question. Thin ice is a sign of mineral scale buildup on the evaporator plate, which prevents proper heat transfer during the freezing cycle. Running a clean cycle with the correct cleaner will resolve this. The recommended cleaner for your unit is part number PS12583750. To run the clean cycle, press the On/Off button to turn the ice maker off and wait 5 to 10 minutes for any remaining ice to drop, then scoop all ice out of the bin. Unscrew the drain cap from the bottom of the water reservoir to drain it completely and replace the cap. Pour one full 16 oz bottle of Affresh cleaner into the reservoir, then refill the empty bottle twice with plain tap water and add both to the reservoir. Press the Clean button, the cycle will run automatically for approximately 70 minutes. Once complete the clean light will turn off, drain the reservoir again, replace the cap, and press On/Off to resume normal operation. Discard the first 2 to 3 batches of ice after cleaning to fully flush any remaining solution before use. We hope this is what you were looking for!
The water filled on startup (actually over-filled, which was a clue). After that water was used to make ice, no new water came in so the recirculation pump just made whining noises in the mostly empty reservoir. Since water could come in (on start up) I reasoned it wasn't the water inlet valve, and everything else suggested the ice maker was getting inaccurate info about how much water was in the reservoir. Turns out, the water recirculation pump has a water level sensor built in. So while the pump itself still functioned, the water level sensor inside had gone bad. Replacing the pump fixed the issue. There are videos online that show how to accomplish that, but it was pretty straight-forward. The dis-assembly was sometimes irritating because it's hard to see and maneuver around inside. It'll help if you put the machine closer to eye level. Pay close attention to videos that show the disassembly because there are a couple of tabs that are hard to find.
I'm an hvac/r technician, and regularly work on ice machines. Begin my pulling the white over beneath the control panel. It snaps in place so pull on the bottom then left out. 1/4 nut driver is all you need, and remove the screw holding the bin thermistor clip to the side. Up to the right , beneath the control panel, behind the plastic panel you previously removed is the mollex connector. Unplug the thermistor and follow instructions in reverse to reinstall.
