This OEM gray Dishwasher Lower Dishrack Wheel Assembly is a plastic kit that allows the rack to slide in and out of the dishwasher easily. If it breaks or becomes damaged. sliding will feel difficult....
Sold individually. This part secures the upper side of the dishwasher to the underside of the counter or cabinet to prevent the dishwasher from moving, shaking, or tilting forward.
The tine pivot clip, also known as the tine row pivot, is used in dishwashers and is located in the upper dishrack. At around 3 inches in length, the clip is used to keep the tine row in place in the ...
This manufacturer-approved Rack Stop Clip is a gray plastic part which can be installed with a screwdriver. Measuring slightly over an inch in length, it prevents the rack from sliding too far and fal...
This drain pump is used in dishwashers to remove water from the dishwasher tub. If the impeller in the dishwasher is damaged or the motor has been shorted out and will not drain, it is possible the bo...
Prevent leaks and maintain optimal cleaning performance with this durable dishwasher door seal. It creates a secure barrier to keep water contained during wash cycles, ensuring reliable operation. Rep...
This part is the replacement door seal for your dishwasher. It is approximately 22 inches long and 2 inches wide. This door seal is made of gray plastic and is found at the bottom the dishwasher. The ...
Also known as rack adjuster. Sold individually.
This is an original part from KitchenAid, Kenmore, Whirlpool, Jenn-Air, and Maytag for use with Dishwashers. The dishrack adjuster arm positioner clip...
This is also called the 3rd-level spinner. This part works like a little spray arm at the top of your dishwasher.
$35.15
In Stock
Questions And Answers for KUDS30IXBL4
Ask our experts a question about this model and we'll get back to you as soon as possible!
4 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Alice
December 16, 2019
What is the year this model was made?
For model number KUDS30IXBL4
Hi Alice,
Thank you for your question. Before we can verify the age of your dishwasher, we would also need the serial number from it. The serial number will be found on the same tag as the model number. We hope this helps. Thank you and have a great day!
1 personfound this helpful.
Was this helpful?
Thank you for voting!
Julie
February 3, 2020
When i open the door after dishwashing cycle, there always lots of soapy form at the bottom of the dishwasher; the form will disappear after it dry out. Is it normal? The dishes look clean but i don't feel comfortable seeing the soapy form. Please help. Thanks!
For model number KUDS30IXBL4
Hello and thank you for writing.
If suds (bubbles) or soap foam are present when the door is opened, turn off the dishwasher and allow suds to dissipate. This may take several hours. Make sure any initial water is pumped out of the tub. Cause: Using the wrong type or too much detergent can cause over-foaming. We hope this helps. Please contact us anytime if you require further assistance.
Was this helpful?
Thank you for voting!
Joyce
April 22, 2024
Size so as to replace
For model number KUDS30IXBL4
Hi Joyce, thank you for contacting us. According to our research, your model has approximately the following dimensions:
Width: 23 7/8 inches.
Depth: 24 1/2 inches.
Height: 33 7/8 inches.
We hope this information helps!
Was this helpful?
Thank you for voting!
Joseph
October 5, 2025
When I turn on the dishwasher, it switches to drain. It won't go through a wash cycle. If I start a wash cycle, it first sounds like it's going to start and then it switches over to Drain/Cancel
Serial #
F14211848
For model number KUDS30IXBL4
Hi Joseph, thank you for reaching out. The issue could be with the control board, part number PS11753985. You may need to replace it to fix the issue. We hope this sorts out your problem!
Replacement was pretty easy after figuring out how to unsnap/unlock the old pieces. Tools only used to do a little prying and poking, but really aren't needed. Everything either snaps or slides together. Piece of cake
Pulled dishwasher from under counter, attached link to spring, hooked spring back into frame/chassis, threaded link through pulleys, attached other end of link onto door, reinstalled dishwasher under counter. All's well. Note-I purchased an extra link anticipating that the other one will fail. They're cheap enough.
I took the broken basket adjuster off and then attached the new one. It wasn't too difficult, however some removal instructions and re-install instructions( or just a picture supplied) would have been helpful. This isn't an issue for a mechanically inclined person, but would be a challenge for someone that isn't. Thanks.
