Need a new jar for your blender? This 56-ounce plastic jar comes ready to go—with blades, seals, and the drive spline already in place—so you can get back to making smoothies, soups, and more. It’s de...
$167.09
In Stock
Order within the next 7 hrs and your part ships today!
Ask our experts a question about this model and we'll get back to you as soon as possible!
2 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Bill
December 30, 2019
My blender leaks
For model number KSB580NK1
Hello Bill and thank you for writing.
Can you please let us know where the leak occurs from?
The bottom where the jar attaches to the base or maybe a hairline crack somewhere in the jar or from the top lid? Looking forward to your reply so we can find you the correct information. We hope this helps. Please contact us anytime if you require further assistance.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Susan
December 26, 2019
The blender leaks at the blade. What do i need to repair that’s?
For model number KSB580NK1
Hi Susan, thank you for your question. You would have to replace your jar: PS11754093. Good luck with your repair.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
I didn't realize there was a spoon in the blender and it made a total racket as the blades and housing were falling apart. The blender jar, blades and housing are all one piece so my less than 2 month old blender was completely trashed. Rather than spend $100 on a new blender, I spent $24 on a new jar... popped it on the blender in place of the old one and it's better than new! And I'm much more careful using it!
Put masking tape around the coupling and put the coupling in a vise upside down. took the bottom apart and unscrewed the main shaft screw. ITS LEFT HAND THREAD!!! Screw on new coupling and put the bottom back on.The masking tape is just to protect the finish.
