Need a new jar for your blender? This 56-ounce plastic jar comes ready to go—with blades, seals, and the drive spline already in place—so you can get back to making smoothies, soups, and more. It’s de...
$167.09
In Stock
Order within the next 7 hrs and your part ships today!
Ask our experts a question about this model and we'll get back to you as soon as possible!
2 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Tony
March 21, 2020
Why might blender kitkenaid model ksb560obo be making a grinding noise with a slight burning smell especially at high speed.
For model number KSB560OB0
Hello, Thank you for your question. That issue is usually caused from the blades being worn/damaged. You will need to replace those to fix the issue. The blades are sold with the base of the blender. You would need to order Part# PS11756236. We hope this helps.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Sandra
July 5, 2021
Blender leaks around bottom of pitcher. It seams to be around the blades where it connects to bottom washer on the pitcher.
For model number KSB560OB0
Hi Sandra,
Thank you for your question. If the jar is leaking around the blades, you will need to replace jar. The part number listed under your model number for the jar is PS11756236. If you would like to place an order for it, you may order it either online or by calling our customer service line and anyone will be happy to assist you. We hope this helps! If you have any questions, please let us know.
I didn't realize there was a spoon in the blender and it made a total racket as the blades and housing were falling apart. The blender jar, blades and housing are all one piece so my less than 2 month old blender was completely trashed. Rather than spend $100 on a new blender, I spent $24 on a new jar... popped it on the blender in place of the old one and it's better than new! And I'm much more careful using it!
Put masking tape around the coupling and put the coupling in a vise upside down. took the bottom apart and unscrewed the main shaft screw. ITS LEFT HAND THREAD!!! Screw on new coupling and put the bottom back on.The masking tape is just to protect the finish.
