Need a new jar for your blender? This 56-ounce plastic jar comes ready to go—with blades, seals, and the drive spline already in place—so you can get back to making smoothies, soups, and more. It’s de...
Ask our experts a question about this model and we'll get back to you as soon as possible!
1 question answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Frank
January 3, 2023
The plastic turning gear below the blade that fits into the motor coupler is stripped. I cannot find the replacement part. Please advise.
For model number KSB560MC0
Hello Frank, thank your for your question. The small white plastic gear is only sold as a part of the Jar Assembly PS11756236. The Black coupling the intersects with the white gear is part PS11751771. We hope this information will help you.
I didn't realize there was a spoon in the blender and it made a total racket as the blades and housing were falling apart. The blender jar, blades and housing are all one piece so my less than 2 month old blender was completely trashed. Rather than spend $100 on a new blender, I spent $24 on a new jar... popped it on the blender in place of the old one and it's better than new! And I'm much more careful using it!
Put masking tape around the coupling and put the coupling in a vise upside down. took the bottom apart and unscrewed the main shaft screw. ITS LEFT HAND THREAD!!! Screw on new coupling and put the bottom back on.The masking tape is just to protect the finish.
