This Refrigerator Air Filter is a white 1.8x3.2" plastic filter which neutralizes odor and bacteria in the air. It should be replaced every six months at a minimum. Refer to your user manual and model...
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your prod...
This is an OEM replacement ice and water filter for your refrigerator. In side-by-side refrigerators, it is found in the top right corner or the bottom left grille. In bottom-freezer refrigerators, th...
If your refrigerator or freezer is too warm, or making noises, you may need to replace the fan blade. The fan blade attaches to the evaporator motor, which is in the freezer section, to help circulate...
This mounting screw is a genuine OEM replacement part for the door handle in your refrigerator. If you are having trouble shutting the refrigerator door, or opening it, replacing this screw can help s...
When energized, this part releases water from the supply line into the ice mold.
$148.67
In Stock
Questions And Answers for KRSC503ESS00
Ask our experts a question about this model and we'll get back to you as soon as possible!
9 questions answered by our experts.
< Prev
1
2
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Karen
April 26, 2023
The light in my freezer is not coming on when we open the door. The refrigerator is working fine.
For model number KRSC503ESS00
Hi Karen, thank you for reaching out. Based on the description that you have provided, we would recommend checking the door switch, part number PS16218024, as it is the most likely cause of this issue. We hope this solves your problem!
On the bottom of my refrigerator in the fresh food section ice is building up, how i can fix that ?
For model number KRSC503ESS00
Hello and thank you for writing.
Frost buildup inside the refrigerator can only occur when warm humid air from outside of the refrigerator combines with the cold dry air on the inside. The most common cause of frost buildup inside the freezer PS3653064 or refrigerator PS3653063 compartments are damaged gaskets not sealing properly. You should check the gaskets and replace if needed.
Display says refrigeration cooling is off. What do we do. Thanks
For model number KRSC503ESS00
Hi Cathy, Thank you for your question. There could be a couple of parts causing your issue but because warmth is happening in your fridge, I would suggest testing your defrost timer, your defrost thermostat, your run capacitor, and your start relay as well. I hope that helps. Good luck with your repair.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Terry
November 30, 2019
Having trouble putting a door bin back in place.
For model number KRSC503ESS00
Hi Terry, please watch our video here: https://www.youtube.com/watch?v=rh7QR9v2MDg. Thank you for your question and good luck with your repair!
Was this helpful?
Thank you for voting!
Joseph
June 23, 2023
THE FRAME AND HALF MOON PIECE THAT IS IN MY WATER AND ICE DESPENCER AREA-- ITS WERE I FILL UP MY GLASS WITH WATER AND OR ICE IN THE FREEZER DOOR --THE FRAME AND AROUND THE BOTTOM OF THE HALF MOON PIECE IS WORN OUT LOOKS LIKE IT OLD ANY IDEAS THANK YOU
For model number KRSC503ESS00
Hi Joseph, thank you for writing in. We recommend replacing the Liner, part number PS11701604, the Grille, part number PS11752699 and the drip tray, part number PS11731460. This will give the dispenser a whole new look. We hope this helps.
I used a flat-head screwdriver to pop out the old light rocker switch. Then, I unplugged the wires, plugged them into the new light rocker switch, and then popped the new switch into the hole. That's it! Lights began working again.
An easy job for smaller hands. Removed the two bolts holding the light cover. Removed two electrical connections from the old switch by pinching the retaining clip,removed the switch, snapped in the new one and re-attached the connectors. Your online illustrations helped me to know that the plastic housing for the light switch would only swing down so far and was not intended to be removed. Saved me from breaking that plastic cover's tabs. This home repair saved me more than 5 times the cost of hiring a professional to do it. Very happy homeowner.
