This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
This broiler pan and roasting rack set features a two-piece design that allows fat to drain away for cleaner cooking and reduced splatter. Made with a durable, high-heat resistant porcelain finish, it...
If your oven isn’t heating properly or seems to be getting too hot, the high-limit thermostat might be the issue. This part helps keep things safe by shutting off the heat if the temperature gets too ...
Is your oven rack warped or broken, making it difficult to cook? We understand how frustrating that can be, and we have the perfect solution for you. We offer you the genuine Whirlpool Oven Rack, sp...
Are you tired of your oven not maintaining its heat? You might just need the Whirlpool OEM Oven Gasket. This small but crucial part forms a seal between your oven door and the oven's frame, ensuring t...
This broil element heats from the top of your oven to help brown and crisp food. If your oven isn’t broiling properly or the element looks burnt or broken, this genuine replacement can restore perform...
This product comes in a bottle with a brush like Liquid Paper. It goes on incredibly easy. A second coat might be needed. I wanted to prevent rust from setting in so I covered the scratches and dings. The paint is a little brighter since my washer is 10 years old but it still looks great.
1. Turn off the breaker. 2. Remove all of the oven racks. 3. Remove the oven door as per users manual. 4. Remove two 1/4" screws on the plate holding the broil element to the back of the oven. 5.. Remove two 1/4" screws in the front of the element holding reflective plate and element toward the front of the oven. 6. Carefully pull the element out enough to remove the wire spade contacts with from the rear of the element with long nosed pliers being careful not to let the wires go behind the rear oven cavity. 7. Element and top reflective plate assembly can now be removed from the oven. 8. The old element is removed from the reflective plate by removing four 1/4" screws. 9. Install the new element on the plate and reverse the procedure to reinstall the completed assembly into the oven. 10 Reinstall the door and racks, turn on the power and test.
