Sold individually. This surface burner grate is for ranges.
Surface burner grate provides a stable surface for cookware on the surface burner.
Wait until the surface is cool to the touch before ...
$165.72
In Stock
Order within the next 6 mins and your part ships today!
This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
$10.20
In Stock
Order within the next 6 mins and your part ships today!
This oven rack is chrome in color and is approximately 24.76 inches wide by 15.78 inches deep. If your old oven rack is damaged, you should consider replacing it. Many of our customers have determined...
$108.23
In Stock
Order within the next 6 mins and your part ships today!
This is a multi-use and multi-appliance screw. It can be used on a microwave, refrigerator, range/oven, air conditioner, dehumidifier, washer, or dryer. The measurements of this screw are 8 x 1/2 inch...
$26.51
In Stock
Order within the next 6 mins and your part ships today!
This part is the replacement door gasket for your oven. It is made of gray rubber and is sold individually. The door gasket runs along the circumference of the oven door and creates a seal that insula...
$40.94
In Stock
Order within the next 6 mins and your part ships today!
Order within the next 6 mins and your part ships today!
Questions And Answers for KGRS807SSS00
Ask our experts a question about this model and we'll get back to you as soon as possible!
4 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Fadi
February 22, 2020
The gas oven does not start.
For model number KGRS807SSS00
Hi Fadi,
Thank you for your question. If the gas oven does not start, there are some parts that you will need to check to see which one is causing the issue. You will need to check the high limit thermostat, the spark module, the broil igniter, the temperature sensor, the range gas valve assembly, the bake burner assembly, the temperature probe, the transformer, the burner head and the wiring harness. We hope this helps. Thank you and have a great day.
Was this helpful?
Thank you for voting!
Abraham
March 24, 2020
All burners click non stop even if knobs are off. Burners light up.
For model number KGRS807SSS00
Hello Abraham,
Thank you for your question. In order to find the correct parts for this specific model, we will also need the serial number for the mower. Please resubmit your question with both your model and serial number, and help find the correct parts. We hope to hear from you soon.
Was this helpful?
Thank you for voting!
John
January 17, 2022
Initially my range problem was intermittent oven malfunction. The oven would self ignite and bring oven to operating temp. Then some times after 15-45 minutes, I could hear the igniter clicking (4-5 times), but no ignition sound. Oven temp reading stayed on set number. After several minutes and cycles of the oven trying to ignite with no success, I would shut it off. and then start it again. Would now show a lower temp as it was preheating. Sometimes it would ignite the gas, sometime I can only hear the igniter clicking. I then did a stupid thing and ran a self cleaning cycle (I selected shortest cycle). The next day I tried using the oven. Now it was even more temperamental. First couple tries, it only ran for 10 mins. Now neither the oven or broiler will not even attempt to operate (no spark, no gas). NOTE: When the oven igniter could be heard but not igniting, the range top igniters were also sparking.
What do you suggest?
For model number KGRS807SSS00
Hi John,
Thank you for your question. When you placed the oven on the self-clean mode, this may have damaged an already malfunctioning igniter and possibly the temperature sensor and the bake/broil spark electrode. You will need to inspect these parts to see which one is causing the issue. If the surface burners are clicking, moisture may have gotten into the burners. If water recently boiled over from one of your cooking pots or if you have recently cleaned them, allow them to dry out. We hope this helps! If you have any questions, please let us know.
The oven burner and the broiler burner will not light. Replaced the Range Gas Valve Assembly. This did not resolve the problem. Tested the Temperature Sensor, it’s fine. Further review produced a F2E1 error code in the diagnostics. Replaced the Membrane Switch, error F2E1 still there.
I believe the next step is to replace the Electronic Control Board WP9762794 followed by the Spark Module WPW10331686. Please can you confirm or point me in the right direction. Thanks
For model number KGRS807SSS00
Hi Patrick, thank you for getting in touch. The F2E1 error code means stuck key. Since you have already replaced the membrane switch but the issue persists, we would recommend checking checking the electronic control board, part number PS11747371, as it is most likely faulty and may need to be replaced. We hope this is helpful!
Something Kitchen Aid wont tell you but running a self clean on this model stove blows the fuse located on the back of the stove.
First I slid the stove out and removed the back of the stove held in place by 8 Phillips screws. The thermostat fuse is located near the top middle on the back of the stove. Remove the 2 screws holding it in place. Disconnect the wires, plug in the new part. Put it all back together. Job done in less than 30 minutes.
This repair would have cost $164 through A&E factory service.
My wife used the self cleaning function for the first time after 1.5 years of owning, of course out of warranty. A quick google search identified the problem. Called Kitchenaid, they said of course it can't be that simple, they had never heard of this problem, need to schedule a service call. Googled and found this site, Ordered the part, came in, only took a screwdriver and about 20 minutes, just like all the other posts.
shame on Kitchenaid for not owning up to the problem. I even e-mailed them all the links, they did not acknowledge them.
This product comes in a bottle with a brush like Liquid Paper. It goes on incredibly easy. A second coat might be needed. I wanted to prevent rust from setting in so I covered the scratches and dings. The paint is a little brighter since my washer is 10 years old but it still looks great.
