KFGS306VSS04 KitchenAid Cooktop - Overview
Sections of the KFGS306VSS04
[Viewing 3 of 3]Manuals & Care Guides for KFGS306VSS04
Click to downloadInstall
Installation Instructions
(0.54MB)
Install
Installation Instructions
(2.52MB)
Manual
Owner's Manuals
(3.38MB)
Manual
Owner's Manuals
(2.90MB)
Specs
Product Specifications Sheet
(0.1MB)
Keep searches simple, eg. "belt" or "pump".
Range Control Knob
PartSelect #: PS11748783
Manufacturer #: WPW10132192
Sold individually.
$73.02
In Stock
HEAD, BURNER (RIGHT REAR, LEFT FRONT)
PartSelect #: PS11745753
Manufacturer #: WP8286814
Imagine your kitchen back to operating at its best, with this authentic Whirlpool Burner Head. This is a medium surface burner base that's engineered to give you a consistent flame for even, perfect h...
$88.27
In Stock
Surface Igniter
PartSelect #: PS11731309
Manufacturer #: W10854967
The surface igniter creates the spark needed to light the gas burners on a range, ensuring quick and reliable ignition during everyday cooking. When the original igniter becomes weak, slow to spark, o...
$40.54
In Stock
REGULATOR
PartSelect #: PS12070643
Manufacturer #: W11087445
Having trouble with your Whirlpool cooktop? Don't worry ? we've got just the cure for you ? the powerful Whirlpool REGULATOR. Designed to help your cooktop operate at its peak, this part ensures an ef...
$238.99
In Stock
HEAD, BURNER (LEFT FRONT & RIGHT FRONT&CENTER)
PartSelect #: PS11745754
Manufacturer #: WP8286815
Looking to get your Whirlpool range back to working like a charm? Our Whirlpool surface burner head is the solution you've been looking for! This genuine OEM part ensures a perfectly uniform flame by ...
$97.48
In Stock
Surface Igniter
PartSelect #: PS11754239
Manufacturer #: WPW10398577
Introducing the trustworthy Whirlpool Cooktop Surface Ignitor'your key to a fully functioning and efficient stove. This authentic, quality part is designed to work with numerous Whirlpool cooktop mode...
$84.93
Special Order
HEAD, BURNER (LEFT REAR)
PartSelect #: PS11745752
Manufacturer #: WP8286813
Having trouble with uneven flames on your stove? We have just the fix for you ? the Whirlpool Surface Burner Head. This genuine part, original from Whirlpool, is designed to distribute gas evenly thro...
$95.70
In Stock
BURNR-HEAD
PartSelect #: PS11727871
Manufacturer #: W10836409
Are you having problems with the burner on your Whirlpool or similar appliance? Let's get it fixed ? quickly, easily and safely. The BURNR-HEAD replacement part is designed to seamlessly fit into your...
$122.09
In Stock
Questions And Answers for KFGS306VSS04
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
center igniter needed replacement
Turn off gas and unplug cooktop. Lift off the 3 grills. Lift off the cast iron and aluminum burner parts. Lift off the five control knobs, noting that the middle knob has a thicker stem.Find star bit that fits the machine screws around each burner. Start removing with the bit in a nut driver. If you have to use a 1/4 inch socket for some, try not to break or strip the screws or the bit. Apply heat with a propane torch if stuck hard. After that, lift stainless tray off. Lift out foil pad. Mine was the center burner igniter. Using two wrenches each side, disconnect gas lines from each side. Phillips head to disconnect plate from burner. The igniter is held in place with spring and clip. Unplug igniter wire from electronic box. I used a hemostat so as not to lose the spring clip .Spring can be removed at the plug end of the wire. A big allen key fits the one inch wide middle burner part - remove it. Now pull the old igniter out through the top of the burner. Use a small round file to make the igniter hole smoother and maybe slightly larger. Thread new igniter through hole, plug end first. Spring and clip on bottom are hard to get. Try not to lose the clip- It can spring off into space.Plug igniter wire into electronic box. I used an anti-seize compound on all threaded parts. Go carefully in reverse order . Plug in cooktop and turn on gas. test new igniter. Good luck
Parts Used:
-
FRANCIS X from LAKE ELSINORE, CA
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver, Screw drivers, Socket set, Wrench (Adjustable)
6 of 6 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Would not spark
-
Elbert from SAN TAN VLY, AZ
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Gas explosion due to bad Gas Pressure Regulator
First step is to turn gas off to cook top and also disconnect power to the unit. Than using a crescent wrench disconnect the gas line going to the unit from the Regulator. Than again using the crescent wrench disconnect the regulator from the bottom of the unit. Next remove the nipple that connects the gas line to the regulator from the old unit. Apply new pipe dope to the threads and screw it into the new one and tighten down. Next install the regulator to the unit and install the gas line to the regulator. once done with the install you can now plug the unit in and turn on the gas. You are now ready to use the cook top again
Parts Used:
-
Charles from Buena Park, CA
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Wrench (Adjustable)
3 of 18 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!