This water filter purifies water going to the water dispenser and sometimes the icemaker as well. This part should be replaced if it is causing reduced water flow or just replaced periodically per the...
This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
This is a replacement end cap for your refrigerator pantry drawer. The pantry drawer has an endcap on either side, which encloses the drawer. This end cap is for the left side of the pantry drawer onl...
This part is the replacement for the end cap on your refrigerator pantry drawer. Your pantry drawer will have two end caps; one for the right side and one for the left. This is the end cap for the rig...
This door bin is for your refrigerator. It is an authentic OEM part sourced directly from the manufacturer. The door bin is made of plastic, and attaches to the inside of your refrigerator door. It is...
This part is the replacement pantry drawer cover for your refrigerator. It is made of white and clear plastic and is approximately 31 inches long and 7 inches wide. The pantry drawer cover is found at...
This air damper control assembly is for refrigerators.
The air damper control assembly controls the cold airflow from the freezer compartment into the refrigerator compartment.
Unplug the refrig...
This light switch may also be known as a refrigerator door switch or a light switch kit, and is compatible with your refrigerator. The function of the refrigerator door switch is to turn on the light ...
$35.26
In Stock
Questions And Answers for KFCS22EVMS8
Ask our experts a question about this model and we'll get back to you as soon as possible!
12 questions answered by our experts.
< Prev
1
2
3
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Cluny
March 12, 2020
On the top shelf right at the back attached to the back of the fridge is a white box (not electronics on it). It is attached to the top of the fridge. This box is making a strange sound which has not happened before. Likely a fan or fliter having an issue (loud clicking noise). What do i do to check out what is happening and what replacement part do i need?
For model number KFCS22EVMS8
Hi Cluny,
Thank you for your question. In the top back corner of the refrigerator, the part you are referring to would be the compartment for the water filter. If you are hearing a noise from this compartment, this is caused by a change in pressure when water is used from the water tank of your refrigerator. This noise is normal and it will stop once the pressure has returned to normal. We hope this helps. Thank you and have a great day.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Jerry
January 24, 2023
my freezer suddenly quite making ice.can you help?
For model number KFCS22EVMS8
Hello Jerry, thank you for contacting us. Please make sure the ice maker is getting water, if not the issue is probably related to a clogged water filter, part number PS11722130, or a defective water inlet valve, part number PS11754529. If that is not the case, we would suggest checking the ice maker assembly, part number PS11765709. Customer service is available 7 days a week if you require assistance placing an order. Thanks again for reaching out!
Refrigerator is ~ 7 years old. 4 years into it the ice maker stopped working. Ice cubes would get stuck in dispenser, jamming the dispenser and not allowing it to turn/drop fresh ice cubes in tray. I would have to reach in and unjam dispenser to make it work. I replaced ice maker with oem replacement part (full ice maker assembly), and it worked up until November last year. I purchased a second oem icemaker assembly, and it lasted about 3 months before the same issue of jamming presented itself. Freezer temp a 0. Any thoughts? Thanks in advance.
For model number KFCS22EVMS8
Hello Craig, Thank you for the question. This could also be caused by the Ice Maker getting too much water and over filling causing the ice cubes to jam. When changing out the Ice Maker it was unplugged and could have reset the Water Valve long enough for it to work for a bit. Please see the link below on testing the Water Valve. We hope this helps!
https://www.partselect.com/Refrigerator+test-water-valve+repair.htm
Fridge and freezer warm compressor is running 2 fans are working coils are clean can't find the problem
For model number KFCS22EVMS8
Hello Chris, Thank you for your inquiry. We have researched the model number that you have provided and would recommend checking the thermistor, the air damper control, the defrost heater, and the main control board. Also even though you stated that both fans were running, if the evaporator fan in the freezer is not producing cold air, we would still recommend checking it. You can test the parts with a multimeter. If you are unfamiliar with how a multimeter functions, we have videos available to assist you. We hope this helps and if you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
What part numbers are the refrigerator French door gaskets? They need to be replaced. The left and right door have different gaskets.
For model number KFCS22EVMS8
Hi Bonnie, thank you for reaching out. The correct Door Gasket for both doors of your unit is part number PS12069725. These door gaskets are sold separately, so you will need to order two. Customer service is always available to help you place an order if you are having trouble doing so. Good luck with your repair.
Pressed in the end of the filter cover, lowered it down part way. Twisted the old filter 1/4 turn and removed it. Set in the sink to drain. Inserted new filter and twisted it to lock. closed cover. Done. Total time @ 1 Minute.
I removed the drop-down outer housing by gently prying the sides of the two pivot pins at the rear. This gave me move 'room' to grip and slightly rotate then pull the old filter forward and away from the tight suction connection. I was concerned that I would be too forceful for the plastic assemblies and would break something; deliberate motions and a steady thought process on the problem helped disengage the darned old filter!
