This is the replacement large surface element for your cooktop or range. It is approximately 10-inches in diameter and is 1200/2500 watts. The large surface element is installed under the cooktop and ...
This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
This broil element is found on the roof of the oven. The broil element is at the top of the oven and supplies the heat to broiling. 14" x 15" with 1-3/8" inserts.
This part works with the following...
This oven rack is chrome in color and is approximately 24.76 inches wide by 15.78 inches deep. If your old oven rack is damaged, you should consider replacing it. Many of our customers have determined...
This surface element is for ranges.
The surface element supplies the heat to a cooking area on top of the range.
Unplug the range or shut off the house circuit breaker for the range before insta...
This surface element control switch is for ranges.
Surface element control switch turns the surface element on and off and controls how much heat the element produces.
Unplug the range or shut o...
This bake element is found on the bottom of the oven.
$156.00
In Stock
Questions And Answers for KESS907SSS04
Ask our experts a question about this model and we'll get back to you as soon as possible!
4 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Scott
September 12, 2022
Left front burner eye red 'on light' flickers when on and eye comes on very hot even when turned to med or low then recedes to low or off. Temp level very erratic regardless of temp selected. Is eye burning out or temp control an issue? other?
For model number KESS907SSS04
Hello Scott, thank you for reaching out. According to our research on the model, the problem appears to be with the Range Surface Element Control Switch, part number PS11747407. Customer service is available 7 days a week if you need help placing an order. We hope this helps!
Oven runs away with temperature. Display usually says preheating but doesn't reach displayed temp even though separate grill probe keeps climbing on the temp. No errors on display. Ohms reading on probe is 1087 at room temp. Looking for suggestions.
For model number KESS907SSS04
Hello Kevin, thank you for contacting us. We would recommend checking the following parts to fix your issue: Temperature Sensor, part number PS11748765, High Limit Thermostat, part number PS11747248, and Broil Element, part number PS11747304. We hope this helps! If you need help placing an order, customer service is open 7 days a week. Thanks again for your great question.
Takes almost an hour to preheat oven to 350 degrees. What could be the problem and/or how do i troubleshoot?
For model number KESS907SSS04
Hello and thank you for writing.
It certainly sounds like it could be a faulty high limit thermostat PS11747248 and/or possibly a faulty temperature sensor PS11748765, you should check the part(s) for signs of damage, and replace as necessary. We hope this helps. Please contact us anytime if you require further assistance.
Hello John, thank you for writing. It does sound like a temperature sensor issue. Measure the oven temperature sensor resistance using a volt/ohm meter. If the resistance isn’t 1080 ohms at room temperature (70 degrees F), replace the oven temperature sensor. If the oven temperature sensor resistance and wire harness connections are okay, replace the electronic oven control (EOC). Hope this helps!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
Something Kitchen Aid wont tell you but running a self clean on this model stove blows the fuse located on the back of the stove.
First I slid the stove out and removed the back of the stove held in place by 8 Phillips screws. The thermostat fuse is located near the top middle on the back of the stove. Remove the 2 screws holding it in place. Disconnect the wires, plug in the new part. Put it all back together. Job done in less than 30 minutes.
This repair would have cost $164 through A&E factory service.
