Models > JGS8860BDP

JGS8860BDP Jenn-Air Range - Overview

Sections of the JGS8860BDP

[Viewing 9 of 9]

Manuals & Care Guides for JGS8860BDP

Click to download
Keep searches simple, eg. "belt" or "pump".
Oven Igniter - Vertical Mount Bake and Broil – Part Number: 74007498
Oven Igniter - Vertical Mount Bake and Broil
★★★★★
★★★★★
(28)
PartSelect #: PS2085070
Manufacturer #: 74007498
This broil igniter assembly comes with its own metallic mounting bracket and an seven inch long dual wire lead with a plastic plug.
$118.60
  In Stock
Short Oven Sensor Kit – Part Number: 12001655
Short Oven Sensor Kit
★★★★★
★★★★★
(21)
PartSelect #: PS2003225
Manufacturer #: 12001655
This temperature sensor detects the temperature within the oven cavity.
$58.89
  In Stock
Burner Electrode – Part Number: WP74009336
Burner Electrode
★★★★★
★★★★★
(6)
PartSelect #: PS11744318
Manufacturer #: WP74009336
This part has a male spade and helps your burner ignite and produce flame. If a wire lead is needed, you can purchase locally.
$52.84
  In Stock
Door Gasket – Part Number: WPW10162384
Door Gasket
★★★★★
★★★★★
(19)
PartSelect #: PS11749287
Manufacturer #: WPW10162384
This oven door gasket comes with built in retaining clips.
$118.08
  In Stock
Burner Knob – Part Number: WPW10175695
Burner Knob
★★★★★
★★★★★
(13)
PartSelect #: PS11749601
Manufacturer #: WPW10175695
Sold individually. This knob accepts a D-shaped shaft.
$26.14
  In Stock
Screw – Part Number: W11233072
Screw
★★★★★
★★★★★
(5)
PartSelect #: PS12349731
Manufacturer #: W11233072
This is a multi-use and multi-appliance screw. It can be used on a microwave, refrigerator, range/oven, air conditioner, dehumidifier, washer, or dryer. The measurements of this screw are 8 x 1/2 inch...
$26.43
  In Stock
Inner Door Glass Pane – Part Number: 74003645
Inner Door Glass Pane
★★★★★
★★★★★
(15)
PartSelect #: PS2081701
Manufacturer #: 74003645
Glass only.
$138.72
  In Stock
Oven Rack – Part Number: WP7801P173-60
Oven Rack
★★★★★
★★★★★
(4)
PartSelect #: PS11744745
Manufacturer #: WP7801P173-60
Used in the lower oven. Sold individually.
$122.69
  In Stock
Screw – Part Number: WP400021-1
Screw
PartSelect #: PS11742240
Manufacturer #: WP400021-1
Sold individually.
$16.85
  In Stock
Meat Probe – Part Number: WP7430P038-60
Meat Probe
★★★★★
★★★★★
(7)
PartSelect #: PS11744536
Manufacturer #: WP7430P038-60
Also known as Heat Probe or Gauge. This probe is used to check the internal temperature of the meat to ensure proper temperature is reached.
$225.73
  In Stock
X-Large Burner Head with Electrode – Part Number: 74007736
X-Large Burner Head with Electrode
★★★★★
★★★★★
(2)
PartSelect #: PS2085280
Manufacturer #: 74007736
This is the burner head and electrode for your gas range. If your gas igniter glows but will not light, or if the element will not start or heat entirely, you may need to replace the burner head. This...
$109.77
  In Stock
Screw, Igniter – Part Number: WP8273062
Screw, Igniter
★★★★★
★★★★★
(1)
PartSelect #: PS11745563
Manufacturer #: WP8273062
This screw is sold individually.
$9.96
  In Stock

Questions And Answers for JGS8860BDP

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

3 questions answered by our experts.
  • 1
Sort by:
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Nora
January 7, 2020
I allready change the control pannel and not working, it doesnt turn on
For model number JGS8860BDP
PartSelect logo
Hello Nora, thank you for your question. If the control panel/oven will not turn on, we would recommend testing/replacing the main board Part #: PS11745980, igniter PartSelect Number: PS2085070 and the regulator PartSelect Number: PS2180054. I hope this helps.

1 person found this helpful.

Was this helpful?
Thank you for voting!
Ben
February 26, 2022
Oven reaches set temp and than cools down, will not recycle. I've replaced the ignitor, pressure regulator/safety gas valve and have tested the oven sensor and it reads 1080 ohms. What will I need to replace next? Thank you
For model number JGS8860BDP
PartSelect logo
Hello Ben, Thank you for the question. With the other parts replaced and tested, this could indicate a faulty Electronic Control Board that controls the Oven Functions. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!

Was this helpful?
Thank you for voting!
Related Parts:
Don
September 7, 2022
is there two oven igniters one for bake and one for broil
For model number JGS8860BDP
PartSelect logo
Hello Don, Thank you for your inquiry. We have researched the model number that you have provided and only show one igniter for your model for bake and broil-part# PS2085070. We hope this helps and if you need help placing an order for a part, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!

Was this helpful?
Thank you for voting!
Related Parts:
  • 1

Common Symptoms of the JGS8860BDP

[Viewing 10 of 10]
Gas igniter glows, but will not light
Fixed by
these parts
Fixing Fixing Fixing
Show All
Little to no heat when baking
Fixed by
these parts
Fixing Fixing Fixing
Show All
Will Not Start
Fixed by
these parts
Fixing Fixing Fixing
Show All
Oven not heating evenly
Fixed by
these parts
Fixing Fixing Fixing
Show All
Element will not heat
Fixed by
these parts
Fixing Fixing Fixing
Show All
Oven is too hot
Fixed by
these parts
Fixing Fixing
Show All
Door won’t close
Fixed by
these parts
Fixing Fixing
Show All
Gas smell
Fixed by
these parts
Fixing
Show All
Touchpad does not respond
Fixed by
these parts
Fixing Fixing Fixing
Show All
Little to no heat when broiling
Fixed by
these parts
Fixing Fixing
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Oven wouldn’t heat up properly
My oven has two igniters so I needed to determine which one was the problem.

Using the amp/multi meter I tested the connection between the igniters and the valve, with the oven turned on, to find the bad igniter. Depending on the model of stove you have, the amp reading you need for a properly functioning igniter will vary. My lower igniter read 2.7 amps with a rated amp between 3.3 and 3.6. So that was the culprit.

Replacing the igniter was easy. Two screws and a wire connected with a plug. I was able to do the diagnosis and unplug the wire without pulling the oven out. I pulled the drawer out and removed the two screws in a cover behind where the drawer was. You may not be so lucky…I have long arms.

I found removing the oven door made it easier to reach the igniter itself. To remove the door just open it slightly and pull up, it should come off easy…and replace in opposite manner.

Keep track of your screws and put it back together the way you found it except for the igniter that is.

Anyone with moderate technical skill could easily do this repair. The diagnosis is the hard part. I estimate I saved about $200 doing it myself.

Good luck.
Parts Used:
Oven Igniter - Vertical Mount Bake and Broil
  • James from Berwick, ME
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
246 of 279 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
F1 code - gas over would not heat.
Repair tech checked oven and said the control panel was bad and needed to be replaced. The new control panel would cost over $450.00! I found that the oven sensor was bad and replaced it for $30.00. The old oven sensor had failed following a self cleaning cycle. I found that the wires coming out of it were burnt.

Replacing the oven sensor was very easy. I removed the back panels 6 screws to gain access to the sensor's connection. I then removed the 2 screw that hold the sensor in place inside the oven and pulled the old sensor out through the oven. I reversed this process to place the new sensor in the oven.
Parts Used:
Short Oven Sensor Kit
  • george from birmingham, AL
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
171 of 183 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Ignitor stopped working on gas cooktop
As others reported, there are 2 torx screws that need to be removed so that the burner element can be removed. One came out with a little effort, the other one did not as it was corroded. After breaking a torx bit, a second torx bit succeeded in breaking off the screw head. This then required a drill to drill out the broken shaft and then rethreading the screw hole. On to the ignitor replacement. The tiny screw holding the ignitor was corroded and would not come out. It too had to be drllled out and rethreaded. It was a 1/3" #4 screw with fine threads. Had to get it an appliance repair store as the local hardware places don't carry fine threaded screws. Finally got it all put back together after a week. My advice before ordering an ignitor is make sure you can take the current burner off the cooktop first to do the repair in the first place. BTW, the ignitor I ordered came quickly and was the correct part!
Parts Used:
Burner Electrode
  • Jeff from Lake Orion, MI
  • Difficulty Level:
    Difficult
  • Total Repair Time:
    More than 2 hours
  • Tools:
    Pliers, Screw drivers, Wrench set
84 of 87 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!