JGP970TEK6WW General Electric Cooktop - Overview
Sections of the JGP970TEK6WW
[Viewing 2 of 2]
Keep searches simple, eg. "belt" or "pump".
Grate Foot
PartSelect #: PS2353327
Manufacturer #: WB02T10461
The Grate Foot is a black rubber part which attaches underneath the grate in order to protect your stovetop from being scratched, which it does by cushioning the grate on your gas range. If this part ...
$17.70
Special Order
D-Burner Burner Head
PartSelect #: PS1019457
Manufacturer #: WB16T10037
Are you struggling with a faulty burner on your GE stove? Don't worry - we've got the perfect solution for you. Meet the GE D-Burner Burner Head, the part that will have your stove back to peak perfor...
$119.91
Special Order
LP Orifice - Center
PartSelect #: PS1020519
Manufacturer #: WB28K10288
This orifice spud changes the burner from natural gas, to liquid propane. This orifice is sold individually. Size: .74mm
$13.95
Special Order
Burner Head - C
PartSelect #: PS953020
Manufacturer #: WB16T10036
This part distributes flame evenly to your cookware. This part does NOT include the burner cap.
No Longer Available
Gas Pressure Regulator
PartSelect #: PS2337785
Manufacturer #: WB19T10078
This comes set from the manufacturer for Natural Gas. It also includes the conversion to Liquid Propane.
This valve automatically cuts off the flow of gas at a certain pressure.
$96.40
Special Order
Economic Nut
PartSelect #: PS951649
Manufacturer #: WB01K10037
This economic nut is a manufacturer-approved replacement part for your oven range. The nut can become worn down or stripped over time and need replacing. Make sure to disconnect power to the unit and ...
$19.28
Special Order
IGNITER
PartSelect #: PS1016133
Manufacturer #: WB13T10073
Looking to upgrade your cooking game? The GE Surface Burner Igniter is your perfect companion. It's crafted by the trusted brand, GE, and it's essential for keeping your range in top-notch condition. ...
$73.14
Special Order
Orifice Spud - Left Front
PartSelect #: PS240984
Manufacturer #: WB28T10017
This orifice spud changes the burner from natural gas, to liquid propane. This orifice is sold individually.
$32.93
Special Order
CAP BURNER H (BK)
PartSelect #: PS1022002
Manufacturer #: WB13T10060
Experience the reliability you need with our GE Black Burner Cap H. This top-notch replacement part is not just a great fit for your GE stovetop'it's specifically crafted to ensure a steady, controlle...
$89.90
Special Order
Common Symptoms of the JGP970TEK6WW
[Viewing 2 of 2]Will Not Start
Fixed by
these parts
these parts
Show All
Touchpad does not respond
Fixed by
these parts
these parts
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Grate Foot had worn out
A rubber grate foot on my range top had worn out. I pulled the worn foot out and installed the new grate foot with no tools or accessories. Good as new! Now I don't have to worry about the grate scraping my range top and scratching the paint. I also ordered extras so I won't have to wait if another wears out.
Parts Used:
-
Kathryn from Star City, AR
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
24 of 34 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
After my housecleaner had been here, I noted that 2 of the little rubber feet were missing from the top grates.
I was pretty upset as the grate wobbled, so I went on line and looked for GE Profile parts. To my amazement, I found the little rubber feet quite easily, and within 2 days they were here at my home. I simply had to stick them in the holes; however, I noted that they did not fit real tight, so I removed them and shot a little glue on them, and they have been in place ever since. Thanks to you guys, I am a happy camper now!!!
Parts Used:
-
Anne from Jacksonville, FL
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
4 of 5 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
burner would not light because spark was skiping to ground elsewhere
First I removed two screws holding head in place and carefully lifted assembly up using flat screwdriver. I separated old igniter from feed wire with gentle pull. I reversed assembly after cleaning old gasket residue. torque screws back in place after cleaning with small ss wire brsh in dremel tool. Tighten in steps to firm light touch. I used new gashket and ignitor.
Parts Used:
-
David A from Spring, TX
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Nutdriver
3 of 4 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!