JGAS02EH1 General Electric Range - Overview
Sections of the JGAS02EH1
[Viewing 2 of 2]
Keep searches simple, eg. "belt" or "pump".
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Stove igniters not sparking
The spark control module is located in the top section near the clock. Take off the back cover. Use needle nose pliers to disconnect the wires. The modules are marked with letters so connecting the new module is very easy. The range works great. My Kenmore is a 1985 model.
Parts Used:
-
rick from NEWNAN, GA
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Pliers, Screw drivers
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Gas electric ignition system stopped working
Replaced old ignition module with new module from parts select.
The most important tip was to label each lead before removing from old ignition module.
The most important tip was to label each lead before removing from old ignition module.
Parts Used:
-
Henry from LAPORTE, PA
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver, Pliers, Screw drivers
1 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!