The filter is made of metal and is intended for use with ranges and cooktops. As per the manufacturer, this filter may be 1/2" slimmer than the original, but will still function the same.
This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
This bake element is found on the bottom of the oven. his bake element is for ranges.
The bake element is at the bottom of the oven and supplies the heat for baking.
Unplug the range or shut off...
Ask our experts a question about this model and we'll get back to you as soon as possible!
3 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Amanda
June 13, 2022
If I'm only replacing the glass top due to scratches, is there anything else required to order other than the glass top itself? Screws? Instructions? Etc or does everything that is needed included in the packaging with the glass top itself? Also can you give me the dimensions of my unit? Length height depth p/n ps2376948
For model number JES9800CAS02
Hello Amanda, Thank you for the question. The PartSelect Number PS2376948 is just the Glass top. For the appliance dimensions, we suggest contacting Whirlpool as we just carry the parts. The only information we have on the appliance is a that it is 30" wide. When replacing the Glass Top, the brackets and screws can be reused from the original part. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Martin
November 4, 2023
only some of my touch pads are working. some aren't. bake, broil, convect,favorites oven light and cancel do not work
For model number JES9800CAS02
Hello Martin, thank you for the question. You will need to replace the control panel, part number PS3407799, to fix the issue. Good luck with your repair!
the touchpad key pad options only work on the left side nothing works on the right side. do I need ps340779 to fix this Issue? or is it the control board not working?
For model number JES9800CAS02
Hello Mark, thank you for getting in touch. Based on the description that you have provided, we would recommend replacing the control panel assembly, part number PS3407799, to fix the issue. Glad to be of assistance!
Removed the oven door by opening slightly, then pic door up to remove. Remove 2 screws holding oven sensor in place, gently pull on sensor to remove, had to remove about 8 inches to get at plastic connector. Unplug connector, had to use an adapter cable supplied with the PartSelect kit to install new sensor, push cable back into opening, reinstall 2 screws. The oven works fine! Note that due to thermal lag the temperature overshoots to 370 degrees and undershoots to 340 degrees, this appears to be normal oven operation. Putting door back in place was easy.
I numbered every part. ex: 1 L., for first part removed left side. I used a magic marker to circle the holes and wrote the number of screws used on the part, set the srews in a separete place, so that I new where these screws went to. The cleanup was pretty time consuming, but I was able to keep my stove, when every repairman I called to fix my stove told me I was better off buying a new stove. ($600.00 stove 2 years old)Please Note: The insulation blanket needed for the entire stove is two pieces, the sides and top are one part # and the bottom and back, are another part #. I did not know this. I just purchased the top and sides. I got lucky, the back and bottom were still in good shape. So I guess I should have read the description of the part more carefully to see what it covers, before I ordered it. It took two people two hours to do the work, it was really nice to have an extra set of eyes, to remember what direction pieces of metal from the stove went. I would do it all over in a heart beat instead of buying a new stove.