This is the replacement large surface element for your cooktop or range. It is approximately 10-inches in diameter and is 1200/2500 watts. The large surface element is installed under the cooktop and ...
The filter is made of metal and is intended for use with ranges and cooktops. As per the manufacturer, this filter may be 1/2" slimmer than the original, but will still function the same.
The oven sensor detects the temperature within the oven cavity and sends the information to the control board. If your oven is not heating evenly, has little or no heat when baking, or is too hot, you...
This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
This 6-inch, 1200-watt radiant surface heating element is a genuine replacement part designed for select ranges. It supplies consistent heat to the designated cooking zone on the stovetop, ensuring ev...
This bake element is found on the bottom of the oven. his bake element is for ranges.
The bake element is at the bottom of the oven and supplies the heat for baking.
Unplug the range or shut off...
Keep your oven safe and functional with this replacement interior door glass, the heat-resistant panel that lines the inside of your oven door. With dimensions of approximately 20 5/8" x 13 1/8", it f...
This oven door hinge is a durable precision-engineered component designed to support the smooth and controlled operation of the oven door. It regulates the door’s opening angle ensures a secure seal d...
$152.72
In Stock
Questions And Answers for JES9800CAS01
Ask our experts a question about this model and we'll get back to you as soon as possible!
3 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Harvey
December 10, 2019
"bake" button stopped working, then, one week later, the "cancel" button is working only intermittently. Tired a hard re-boot by turning off power for 3 minutes. This did not help.Thanks
For model number JES9800CAS01
Hello Harvey, Thank you for the question. If some buttons work and others are not, this normally indicates the Touch Pad on the Control Panel PartSelect Number PS3407799 is defective. Hope this helps!
Hello Lewis, thank you for your question. We have researched your model and found that the issue is probably with the Broil Element, part number PS11744519. If you require assistance to place an order, please contact customer service. We hope that helps!
oven turns off after in has preheated, and a message keeps coming up about a warming drawer which this unit does not have. thanks
For model number JES9800CAS01
Hello Mack, thank you for contacting us. Please make sure that the vents are not blocked and are cleaned. We would recommend testing the thermostat, part number PS2085768, and the temperature sensor, part number PS1570174. If this does not help, the issue is probably due to a faulty control board, part number PS11745985. Customer service is always available to help you place an order if you are having trouble doing so. Good luck with your repair.
Turned the breaker off, I removed 2 screws securing the range top to the range, opened the top and secured it in the up position, Removed the 2 screws securing the element ,one at a time I swapped the quick connectors from the old element to the new and repeated the process in reverse. I save over $100.00 in labor, plus most companies get you for a trip charge. It was easy!!
Removed the oven door by opening slightly, then pic door up to remove. Remove 2 screws holding oven sensor in place, gently pull on sensor to remove, had to remove about 8 inches to get at plastic connector. Unplug connector, had to use an adapter cable supplied with the PartSelect kit to install new sensor, push cable back into opening, reinstall 2 screws. The oven works fine! Note that due to thermal lag the temperature overshoots to 370 degrees and undershoots to 340 degrees, this appears to be normal oven operation. Putting door back in place was easy.
