The filter is made of metal and is intended for use with ranges and cooktops. As per the manufacturer, this filter may be 1/2" slimmer than the original, but will still function the same.
This bake element has push-on terminal ends.
NOTE: This element has been updated by the manufacturer. New installation screws are required. Screws are sold separately.
Sold individually. This is a radiant surface element with a limiter, and it works in conjunction with your range. The function of this part is to give heat to the surface directly above it, on cooking area stovetop.
This leveling leg is black in color and is made entirely of plastic. The manufacture has updated this part from the original. This part now measures approximately 1.859" and sold individually.
This part is a replacement halogen lamp for your oven. The bulb is 25 watts and 120 volts. If your light bulb is burned out, this is the part that replaces it. Be sure to turn off power to your range ...
This is a multi-use and multi-appliance screw. It can be used on a microwave, refrigerator, range/oven, air conditioner, dehumidifier, washer, or dryer. The measurements of this screw are 8 x 1/2 inch...
This switch is used to operate the dual surface burner.
$102.83
In Stock
Questions And Answers for JES9800AAB
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
3 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Luke
November 15, 2022
The display shows both elements turned on during baking cycle warmup, but the broil element never glows like the baking element. The broil element works fine during broil cycle. Should both elements be on during baking?
For model number JES9800AAB
Hi Luke, thank you for contacting us. Generally, the bake settings use only the lower element. Preheat setting turns on both elements, it is the setting to use for recipes requiring a cold start in the oven. After the warmup, the oven switches to the bake element and maintains the temperature with only the lower element. We hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Ardner
March 18, 2022
What is the difference between the AAW and AAB model? I need an ignition switch for my JES9800AAW range.
For model number JES9800AAB
Hello Ardner, thank you for your question. JES9800AAW is a white unit. JES9800AAB is a black unit. The switches for both models would be the same. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you.
Was this helpful?
Thank you for voting!
Janet
March 6, 2023
My vent quit working. What part is needed to fix it?
For model number JES9800AAB
Hi Janet, thank you for contacting us. To fix the issue, we would recommend checking the blower motor, part number PS11750204. We hope this solves your problem!
First, I unplugged the oven. Then, I removed the two screws that hold the element in place. After that, I gently pulled the element toward the front of the oven until the wires were exposed. I disconnected the wires from the old element, removed the old element and then attached the wires to the new baking element. I gently pushed the new element back into the screw holes and screwed the new element in place. When I plugged the oven back into the wall I heard a pop and thought I'd blown up the oven! Turns out the breaker popped...after fixing the breaker, I turned the oven on and the element worked just fine. I highly recommend PartSelect.com for their fast shipping and great products. I will be ordering from them again for future appliance parts.
Removed the oven door by opening slightly, then pic door up to remove. Remove 2 screws holding oven sensor in place, gently pull on sensor to remove, had to remove about 8 inches to get at plastic connector. Unplug connector, had to use an adapter cable supplied with the PartSelect kit to install new sensor, push cable back into opening, reinstall 2 screws. The oven works fine! Note that due to thermal lag the temperature overshoots to 370 degrees and undershoots to 340 degrees, this appears to be normal oven operation. Putting door back in place was easy.
