JED8430BDB18 Jenn-Air Cooktop - Instructions

I merely lifted the downdraft cover and inserted the new screen as
directed. THANK YOU FOR YOUR PROMPT RESPONSE TO MY ORDER.

Used needle nose pliers to remove the remaining broken park from the D connector. Used a little pressure to install the new part on the connector.

used pliers to remove broken knob and push new one on with my hand

Item looked exactly as part to be replaced. Knob lifted out, used pliers to remove rest of Knob assembly then lined up the Dr shapes on Knob and cook top and snapped into place. Took all of 30 seconds to do. Knob looks exactly the same as the Knob it replaced.

Ordered a replacement grease filter.

Disconnected fan from vent and raised cook top and rotated one quarter turn to rest on counter top so I could remove screws with 1/4 inch nutdriver in oder to lift cook surface from unit, then install new switch and reassemble in reverse order. Work perfectly!

Just placed new filter in slot

just needed clearner for the top of my glass top, the operator was very helpful I received my clearniner in 7 days thank you

I used needle nose pliers to remove the broken piece then pushed the new knob on!!

Simply removed old knob and replaced.

removed motor, saw that stablizers were broke and went to a local parts supply shop called SUNDBERG and was given a price of about 49.00 for three stablizers. at that point i went to the internet and found PARTSELECT.COM were i found the same parts for a fraction of the price,17.00, i could not believe it! SUNDBERG customer service was horrible.PARTSELECT custormer service is great and was just over the internet,any how the repair is done no more loud noise and wife is happy again ,for awhile.thanks keep up the good work.i tell everybody about you guys.

I carefully removed the disgusting old filter and took straight to trash. I then used my wet/dry vacuum to clean the rest of the loose debris from the area where the filter area is located. I used a clean, dry cloth to wipe the remainder of the material away and then carefully lowered the clean new filter down into it's new home. So easy, it took longer to type out these directions :)

very easy slip in

Took the old filter out and put a new one in. No tools no fuss no muss. Very easy.

This repair was extremely easy. I was able to lift off the broken fan knob with some pliers. The new knob easily fit and the new knob works like a dream!