Models
>
JDS9860AAP
JDS9860AAP Jenn-Air Range - Overview
Sections of the JDS9860AAP
[Viewing 10 of 10]Manuals & Care Guides for JDS9860AAP
Click to downloadKeep searches simple, eg. "belt" or "pump".

Grease Filter
PartSelect #: PS11743870
Manufacturer #: WP71002111
The filter is made of metal and is intended for use with ranges and cooktops. As per the manufacturer, this filter may be 1/2" slimmer than the original, but will still function the same.
$35.44
In Stock

Bake Element
PartSelect #: PS11744404
Manufacturer #: WP74010750
This bake element has push-on terminal ends.
NOTE: This element has been updated by the manufacturer. New installation screws are required. Screws are sold separately.
$62.90
In Stock

Long Oven Sensor
PartSelect #: PS1570174
Manufacturer #: 12001656
This oven sensor kit comes with two harness adapters. This sensor detects the temperature within the oven cavity.
$44.86
In Stock

Leveling Leg
PartSelect #: PS11744009
Manufacturer #: WP74002557
This leveling leg is black in color and is made entirely of plastic. The manufacture has updated this part from the original. This part now measures approximately 1.859" and sold individually.
$12.82
Special Order

Top Burner Igniter
PartSelect #: PS2082000
Manufacturer #: 74004053
This top burner igniter comes with a mounting bracket.
$39.60
In Stock

Door Gasket
PartSelect #: PS11749287
Manufacturer #: WPW10162384
This oven door gasket comes with built in retaining clips.
$94.61
In Stock

Bi-Pin Halogen Bulb
PartSelect #: PS11744355
Manufacturer #: WP74009925
This part is a replacement halogen lamp for your oven. The bulb is 25 watts and 120 volts. If your light bulb is burned out, this is the part that replaces it. Be sure to turn off power to your range ...
$29.75
In Stock

Screw
PartSelect #: PS12349731
Manufacturer #: W11233072
This is a multi-use and multi-appliance screw. It can be used on a microwave, refrigerator, range/oven, air conditioner, dehumidifier, washer, or dryer. The measurements of this screw are 8 x 1/2 inch...
$24.61
In Stock

Oven Rack
PartSelect #: PS11744745
Manufacturer #: WP7801P173-60
Used in the lower oven. Sold individually.
$99.70
In Stock

Gas Valve Knob
PartSelect #: PS11743848
Manufacturer #: WP71001057
This gas valve knob measures approximately 2 12 inches in diameter. It is a black knob that has white lettering aroud its perimeter denoting the different temperature levels: low, medium, high, etc. T...
$37.43
In Stock

Terminal Block
PartSelect #: PS11750972
Manufacturer #: WPW10245259
It provides a way of connecting individual electrical wires and offers protection of the device from electrical surges (voltages and/or currents).
$39.38
In Stock

Burner Head
PartSelect #: PS11741675
Manufacturer #: WP3403M075-10
This surface burner head is for ranges.
Surface burner head distributes the gas through holes or slots to create an even flame across the cooking area.
Shut off the gas supply and unplug the ran...
$171.97
In Stock
Questions And Answers for JDS9860AAP
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
- < Prev
- 1
- 2
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Ron
December 13, 2019
I have no spark to the sealed gas burners, gas is flowing but no spark to ignite - what would cause this?
For model number JDS9860AAP

Hello Ron, thank you for writing. You will want to replace the Spark Module, part number PS2094592 for your model range. Good luck with your repair!
2 people found this helpful.
Was this helpful?
Thank you for voting!
JOHN
February 18, 2020
How old is this model? Are spare parts available?If we replaced with a new jennair model, what would come closest to matching the dimensions, look, etc.?
For model number JDS9860AAP

Hello and thank you for writing.
Additional to the model number we also need the serial number to establish the year of your unit. Looking forward to your reply, please always include the model number. We hope this helps. Please contact us anytime if you require further assistance.
Spare parts can be found under :
https://www.partselect.com/AdvancedModelSearch.aspx?ModelNum=JDS9860AAP&mfgModelNum=&fkMfgID=1
The dimensions are under this link :
https://partselectcom.azureedge.net/assets/manuals/D76463F1A4948FF62B42F25DFF9B437469B63B25.pdf
We hope this helps. Please contact us anytime if you require further assistance.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Pat
March 24, 2020
What part is defective to cause f1 code? Thanks,
For model number JDS9860AAP

Hello Pat, thank you for your inquiry. An F1 error code indicates that either the touchpad, or control board has become faulty. Replace touch pad, control board (clock), or both if one assembly. We hope this helps.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Cathy
November 4, 2021
My right back burner only lights with a match ? It won’t work on its own
For model number JDS9860AAP

Hello Cathy, thank you for your question. We have researched the model you have provided, and we would suggest the Top Burner Igniter, part number PS2082000. We hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Related Parts:
Yvonne
December 6, 2019
My oven is taking really long to bake something. I replaced the bake element and the long sensor. What is causing the lack of heat?
For model number JDS9860AAP

Hello Yvonne, Thank you for the question. If a new element and sensor did not fix the issue, the Electronic Control with Touchpad - Black may be defective and will need to be replaced. PartSelect Number PS11742968. Hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Related Parts:
- < Prev
- 1
- 2
- Next >
Common Symptoms of the JDS9860AAP
[Viewing 12 of 12]Little to no heat when baking
Fixed by
these parts
these parts



Show All
Element will not heat
Fixed by
these parts
these parts



Show All
Will Not Start
Fixed by
these parts
these parts



Show All
Oven not heating evenly
Fixed by
these parts
these parts



Show All
Oven is too hot
Fixed by
these parts
these parts



Show All
Gas igniter glows, but will not light
Fixed by
these parts
these parts



Show All
Touchpad does not respond
Fixed by
these parts
these parts



Show All
Door won’t close
Fixed by
these parts
these parts


Show All
Will not program
Fixed by
these parts
these parts

Show All
Door won’t open after self cleaning cycle
Fixed by
these parts
these parts

Show All
Little to no heat when broiling
Fixed by
these parts
these parts


Show All
Gas smell
Fixed by
these parts
these parts

Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Replace Grease Filter
Just a couple of minutes to left off the cover grid, left out the old filter and drop in the new one.
Parts Used:
-
Gene from Washington C.H., OH
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
524 of 536 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The element broke in two pieces after food dried on it.
First, I unplugged the oven. Then, I removed the two screws that hold the element in place. After that, I gently pulled the element toward the front of the oven until the wires were exposed. I disconnected the wires from the old element, removed the old element and then attached the wires to the new baking element. I gently pushed the new element back into the screw holes and screwed the new element in place. When I plugged the oven back into the wall I heard a pop and thought I'd blown up the oven! Turns out the breaker popped...after fixing the breaker, I turned the oven on and the element worked just fine. I highly recommend PartSelect.com for their fast shipping and great products. I will be ordering from them again for future appliance parts.
Parts Used:
-
Heather from Huntsville, AL
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
174 of 180 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Oven not holding 350 F, when cooling the coils did not reheat
Removed the oven door by opening slightly, then pic door up to remove. Remove 2 screws holding oven sensor in place, gently pull on sensor to remove, had to remove about 8 inches to get at plastic connector. Unplug connector, had to use an adapter cable supplied with the PartSelect kit to install new sensor, push cable back into opening, reinstall 2 screws. The oven works fine! Note that due to thermal lag the temperature overshoots to 370 degrees and undershoots to 340 degrees, this appears to be normal oven operation. Putting door back in place was easy.
Parts Used:
-
David from Westford, MA
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
152 of 190 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!