JCS57H1 General Electric Range - Instructions

I ordered the 2 burners that were not working. When I got the burners, I discovered that one of the burners was still working and the wiring under that on had burned out. So I ordered the little box kit and repaired it. I only needed to strip wires and twist together and replace the small box. Now all are working and I am cooking with all four burners again. All for about $50.

extremely easy to replace the burner. I just pulled out the old burner and replaced with new one. The whole process took less than ten minutes.

nutdriver to remove unplugged ends plugged ends of new one metal screws thats it

Replaced drip pans that the apartment Superintendent had in place with the correct drip pans and now cooking is beautiful again! No more uneven cooking on the stove top.

Removed the old broken burner and slid the burner prongs into place. Very EASY to replace!

Since it was a plug-in burner, only needed to pull it out and put the other one in.

Another thing I would like to say is that I was very well pleased with the service from partselect.com. I was unable to find the burners in my area.
Was very helpful in selecting the part and was very efficient in sending it.

I followed the instructions from a previous customer posted on your web site. The only tip I would add is make sure you get a snug connection on the element with the connectors on the wires. I used a pair of needle nose pliers and gave it a little squeeze. My concern was I didn't want the wires to come off when I pushed them back through the wall behind the insulation. We are having pizza tonight!

Pug it in! That's it!

Removed burner from each one. removed drip bowl. Inserted new bowl. Replaced burner. Excellent help from order people so I got the correct bowl was irreplacable.

Removed the burner elements, removed and disposed of old drip pans, cleaned the area, relaced with new drip pans and replaced the burner elements. Verified all burners were level - good as the day it was new!

Removed and replaced burner unit.

Just plugged it in and away I went.

After replacement of burner element to no joy, ordered and replaced the infinite switch control. Turned off and tagged range circuit breaker. Lifted top range surface and propped up. Removed screws of control panel back cover and removed cover exposing the front panel control switches and wiring. Tested for any voltage on exposed connectors with multimeter. Noted that replacement switch and old switch had different connector physical layout. Drew a layout of both switch connectors on paper noting that while connector tabs were in different locations the labels of each connection was clearly labeled and matched. Pulled off the knob from old switch and removed the two screws holding it on front control panel. Pulled old switch out at the back of the panel. Then using needle nose pliers pulled one connector at a time from old switch and moved to new switch matching labeled connectors. Reinstalled new switch, back cover, lowered range surface top, turned breaker back on, and new burner control works great.

Unplugged the old one and plugged in the new, which you sent promptly. No tools. Easiest fix ever.

Took the old burner out and inserted the new one. The burner was received two days after ordering. I was very satisfied with the service.