This is a replacement burner cap for your gas range or cooktop. The burner cap is found on the burner head, and prevents debris from getting into the head when it is not in use. The cap is black in co...
This burner cap is for your gas range, and acts as a cover for the burner head. It is black in color and just over 3 inches in diameter. If your old burner cap is damaged or missing, this is the part ...
This non-stick griddle is designed to sit directly on the stovetop, providing a flat cooking surface compatible with most major appliance brands. Measuring approximately 20 inches long and 9 inches wi...
Having trouble with your wobbly GE range? Our adjustable leveling leg is the simple solution you've been looking for. When your range isn't sitting perfectly even, it can lead to a host of issues from...
Upgrade your oven’s cooking performance with this sturdy metal rack, designed to fit select gas ranges and ovens. Measuring approximately 23.75 inches long by 16.25 inches wide, it offers a spacious a...
This extra-large burner delivers higher heat output for faster heating and larger cookware. Designed for even flame distribution, it is replaced when ignition fails or heat becomes inconsistent.
This replacement gas igniter is designed to ignite the burner in compatible models of gas ovens, helping your appliance reach and maintain the correct cooking temperature. If your oven is struggling t...
Get your range working again with this spark module. It creates the spark that lights the burners so you can cook safely and efficiently. If your burners aren’t igniting, replacing this part is an eas...
removed two phillips screws. Unplugged electrical connections replaced unit from PartSelect. They sent holder cover and new bulb (surprise). Great store with great directions.
the flame spreader through the years, developed a hole above the glow coil causing the above trapped gas between the oven pan and spreader to ignite. by replacing the flame spreader the problem is gone and is now working properly. thank you, parts select for being there when i needed the part and also being reasonably priced. mike marino
Repair was very easy. 2 screws to remove the bottom cover inside the oven. 2 more screws to remove the igniter. Cut the wires to remove it from the back of the oven. 3 screws to remove the back cover. Un-clipped old igniter , pushed new one through the hole (from inside the oven). Connected and re-applied screws. Worked like a charm.
