JCGS760BEL1TS General Electric Range - Overview
Sections of the JCGS760BEL1TS
[Viewing 5 of 5]
Keep searches simple, eg. "belt" or "pump".
Burner Cap - 15K
PartSelect #: PS954107
Manufacturer #: WB28K10222
This is a replacement burner cap for your gas range or cooktop. The burner cap is found on the burner head, and prevents debris from getting into the head when it is not in use. The cap is black in co...
$43.95
Special Order
Burner Cap - Black - Medium - 9500 BTU
PartSelect #: PS954202
Manufacturer #: WB29K10023
This burner cap is for your gas range, and acts as a cover for the burner head. It is black in color and just over 3 inches in diameter. If your old burner cap is damaged or missing, this is the part ...
$44.34
Special Order
GRIDDLE
PartSelect #: PS17872911
Manufacturer #: WB31X49806
This non-stick griddle is designed to sit directly on the stovetop, providing a flat cooking surface compatible with most major appliance brands. Measuring approximately 20 inches long and 9 inches wi...
No Longer Available
Range Leg Leveler
PartSelect #: PS2339673
Manufacturer #: WB02K10182
Having trouble with your wobbly GE range? Our adjustable leveling leg is the simple solution you've been looking for. When your range isn't sitting perfectly even, it can lead to a host of issues from...
$14.95
Special Order
Oven Rack
PartSelect #: PS8746173
Manufacturer #: WB48X20249
Upgrade your oven’s cooking performance with this sturdy metal rack, designed to fit select gas ranges and ovens. Measuring approximately 23.75 inches long by 16.25 inches wide, it offers a spacious a...
$93.64
Special Order
BURNER, XL V2
PartSelect #: PS11768024
Manufacturer #: WS01F07289
This extra-large burner delivers higher heat output for faster heating and larger cookware. Designed for even flame distribution, it is replaced when ignition fails or heat becomes inconsistent.
$91.15
In Stock
Oven Light Housing
PartSelect #: PS230438
Manufacturer #: WB08T10002
Must buy bulb locally as per manufacturer.
$75.57
Special Order
IGNITER GLOWBAR
PartSelect #: PS16554328
Manufacturer #: WB13X40206
This replacement gas igniter is designed to ignite the burner in compatible models of gas ovens, helping your appliance reach and maintain the correct cooking temperature. If your oven is struggling t...
No Longer Available
Spark Module
PartSelect #: PS11729094
Manufacturer #: WB13X26360
Get your range working again with this spark module. It creates the spark that lights the burners so you can cook safely and efficiently. If your burners aren’t igniting, replacing this part is an eas...
$98.02
Special Order
Questions And Answers for JCGS760BEL1TS
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Common Symptoms of the JCGS760BEL1TS
[Viewing 4 of 4]Will Not Start
Fixed by
these parts
these parts
Show All
Little to no heat when baking
Fixed by
these parts
these parts
Show All
Element will not heat
Fixed by
these parts
these parts
Show All
Gas igniter glows, but will not light
Fixed by
these parts
these parts
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Oven Lamp Holder Burned
removed two phillips screws. Unplugged electrical connections replaced unit from PartSelect. They sent holder cover and new bulb (surprise). Great store with great directions.
Parts Used:
-
Jack from Okmulgee, OK
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
24 of 31 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
oven post mini explosion sounding
the flame spreader through the years, developed a hole above the glow coil causing the above trapped gas between the oven pan and spreader to ignite. by replacing the flame spreader the problem is gone and is now working properly. thank you, parts select for being there when i needed the part and also being reasonably priced. mike marino
Parts Used:
-
Mchael J. from Chesterfield, VA
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver
14 of 23 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Gas oven was not lighting (bake only)
Repair was very easy. 2 screws to remove the bottom cover inside the oven. 2 more screws to remove the igniter. Cut the wires to remove it from the back of the oven. 3 screws to remove the back cover. Un-clipped old igniter , pushed new one through the hole (from inside the oven). Connected and re-applied screws. Worked like a charm.
Parts Used:
-
Jerry from MACOMB, MI
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Socket set
9 of 9 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!