All Installation Instructions for General Electric Range JB770DP1BB

Needed to replace oven door gasket

Watched youtube video. Very easy to replace

Parts Used:

Range Oven Door Gasket

Jayne from EAST PEORIA, IL
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers

3 of 3 people found this instruction helpful.

Was this instruction helpful to you?

Element went out in glass top stove.

Unscrewed the stove top and replaced the element.

Parts Used:

Haliant Element - 12 Inch

Aleshia from O BRIEN, FL
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver

4 of 6 people found this instruction helpful.

Was this instruction helpful to you?

Incorrect oven temperature due to defective temperature sensor.

Performed repair using a video for reference.

Parts Used:

Temperature Sensor

Anthony from FARMINGVILLE, NY
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver

3 of 3 people found this instruction helpful.

Was this instruction helpful to you?

Large right burner would only light in the outside and would not stay on

Ordered the part. Received the box damaged and did not realize the part was damaged until our son came all the way from Columbus Ohio to install it. We ordered another part which came in a timely manner. Even though I reported the problem and told them that we are not very computer literate they still would not accept that the part was damaged until we sent a picture. Our son came back from Columbus to install the new part which took about an hour. He took pictures which I was then able to send. They then asked for a serial number. I had already sent all the numbers from the part but that is when they said they wanted the serial number from the stove. We are elderly and getting that required me getting on my hands and knees to get it near the floor. Luckily I was able to get up. After multiple emails I now have to send the part back. Good luck to anyone working with this company. I will be waiting for them to reimburse me for the defective part.

Parts Used:

Haliant Element - 12 Inch

JoAnne from LAMBERTVILLE, MI
Difficulty Level:
Very Difficult
Total Repair Time:
More than 2 hours
Tools:
Wrench set

3 of 3 people found this instruction helpful.

Was this instruction helpful to you?

Inner glass assembly had cracked

Took the oven door off and removed the inner door panel, put new glass assembly part in and reassembled. The hard part was getting the door hinges locked back into place.

Parts Used:

Window Pack Assembly

Richard from Gorham, ME
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Socket set, Wrench set

3 of 3 people found this instruction helpful.

Was this instruction helpful to you?

drwer slide under stove broke off.

recieved part the next day. looked different but I followed instructions and the part worked perfect.

Parts Used:

REAR SUPPORT

paul from sewell, NJ
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

3 of 4 people found this instruction helpful.

Was this instruction helpful to you?

The temperature indicator light on the oven was broken.

I removed the control panel by removing 7 screws and replaced the light indicator and lens.

Parts Used:

Light Lens

Jewel from Nacogdoches, TX
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

3 of 4 people found this instruction helpful.

Was this instruction helpful to you?

Did not function

It’s easy to replace and you can found out the video from YouTube to follow the instructions

Parts Used:

Haliant Element

Lung from PINEVILLE, NC
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers

2 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Burnt out Oven bulb

took bulb out, but new one in lol

Parts Used:

Halogen Lamp - 35 Watt

Theresia from MOUNT WOLF, PA
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins

2 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Burner remained on "high" as contacts were fused together

Easy removal of switch and installation of new switch block.

Parts Used:

Surface Burner Switch - 9 Inch

Bruce from HOLMEN, WI
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver, Screw drivers

2 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Stove overheated with an F2 error

Removed screws holding temp sensor, pulled wire out from behind wall until found connector, disconnected old sensor.
Measured resistance of old sensor and compared with new sensor, they measured nearly the same. Installed the new sensor and tested the stove. Came up to temp ok. No problem since, about 2 weeks.

Parts Used:

Temperature Sensor

Richard from PHOENIX, AZ
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver

2 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Oven drawer open and close incorrectly

First I removed the oven drawer. Verified that the support clips would rest correctly on rail, then review installation document with supports to locate alternate location for replacement supports. I did have to personally locate 2 fastners not provided with the supports ot complete installation. After installation, oven drawer opens and closes smoothly.

Parts Used:

REAR SUPPORT

James from Goldsboro, NC
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

2 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Inner glass broke

Removed torx screws for door handle as well as torx screws for both hinges to separate the door halves to extract broken glass and to install new glass panel. Other reviews said not to remove hinge screws, however I had no problem reinstalling them.

Parts Used:

Window Pack Assembly

Mark from OLIVE BRANCH, MS
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins

2 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Replace Thermostat

Pull oven out away from the wall, unplugged from outlet, removed center cover by removing 5 sheet metal screws. disconnected thermostat sensor from control cable. Opened oven door and removed screw that holds thermostat sensor. Pulled thermostat sensor out replaced with new sensor. Plugged sensor in to control cable. Replace panel and screws. Then my wife made me clean the oven. I recommend making the repair when your wife is not home.

Parts Used:

Temperature Sensor