This Drip Bowl, also known as a burner bowl or drip pan, is made to fit an element 8 inches in diameter and comes in chrome. The actual total diameter of this drip bowl is closer to 10 inches, but don...
The 8-inch surface element switch is also known as an infinite heat switch, and is a part for your range. It controls the large surface element. It will turn the element on and off, and allow you to c...
This drip bowl, also known as the drip pan or burner bowl, is 6 inches in internal diameter to match the burner, but actually measures closer to 8 inches in total diameter to its outer edges. This au...
This 40-Watt light bulb is sold individually and is a genuine OEM replacement option for your home appliances. It is specially designed to withstand extreme temperatures, so this bulb is compatible wi...
This rear drawer support comes with the installation screw. This part has been redesigned. The new support inserts towards the rear of the drawer as opposed to the side.
This part is also known as the "brains" of the appliance. ***NOTE: The wiring could be different than the original control. This part may need to be installed by an appliance repair person.
This part is the replacement light socket for your oven. The oven light socket provides power to the light, and at the same time holds the light bulb in place.
Ask our experts a question about this model and we'll get back to you as soon as possible!
5 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Gordon
December 17, 2019
Oven does not work and the oven light. Love appears when i push broil or bake
For model number JB250DF5WW
Hello Gordon and thanks for writing.
This code usually means that a component has failed somewhere in the door lock circuit. This code usually means that either the probe or the receptacle may need to be replaced. This code usually means that the electronic control needs to be replaced. oven control Part Number: PS8754334 is in the list of compatible items for your model. We hope this helps. Please contact us anytime.
Was this helpful?
Thank you for voting!
Ella
January 11, 2020
Can I replace my drip pans and the oven racks with a material that's safe to clean in the oven?
For model number JB250DF5WW
Hi Ella. The only parts we would have that are compatible are the originals that would have came with the oven. Thank you for your question and good luck with your repair!
Hi Debora, thank you for reaching out. The part you are looking for is the broil unit assembly, part number PS12342501. We hope this helps!
Was this helpful?
Thank you for voting!
Stephen
November 20, 2023
Front right burner gets to hot on low.
For model number JB250DF5WW
Hello Stephen, thank you for contacting us. Based on our understanding of the issue, we would suggest replacing the control switch, part number PS236750, to solve the problem. It turns the surface element on and off and controls how much heat the element produces. We hope that helps!
Did self cleaning, when tried to turn oven on,unlock door keeps flashing
The
e door is unlocked.The oven will not come on
For model number JB250DF5WW
Hi Kim, thank you for your inquiry. Based on our understanding of the issue, we would suggest replacing the door lock assembly, part number PS7320224, to solve the problem. We hope that helps!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
Turned off circuit breaker to range. Removed the 2 oven racks. Removed two screws in back of oven compartment. Pulled element forward and the terminal connections get exposed. The right terminal clip disconnected by itself and the wire went back into the stove and could not be retrieved. Removed range draw under the oven and pulled entire range out from wall about 4 feet.. Removed metal backing with a socket wrench and exposed the oven element wires and terminals. Reinstalled new element and metal backing. Since range was out from wall, cleaned and vacuumed before pushing stove back in place. Since range draw was out re-leveled by setting adjustable feet. Reinstalled drawer and racks. Turned on circuit breaker. Tested element by setting bake cycle on.