Models > HTDX100EM8WW

HTDX100EM8WW Hotpoint Dryer - Overview

Sections of the HTDX100EM8WW

[Viewing 4 of 4]
Keep searches simple, eg. "belt" or "pump".
Timer Knob – Part Number: WE1M652
Timer Knob
★★★★★
★★★★★
(18)
PartSelect #: PS1482196
Manufacturer #: WE1M652
This OEM Timer Knob is a white plastic knob which can be easily installed onto your machine's timer rod, in order to control the timer. If the part breaks off, it should be replaced. Refer to your use...
$24.71
  Special Order
Drive Belt – Part Number: WE03X29897
Drive Belt
★★★★★
★★★★★
(15)
PartSelect #: PS16542496
Manufacturer #: WE03X29897
This dryer drum drive belt is 89.5" long and has four ribs. This part helps spin the drum during the drying cycle.
$38.35
  Special Order
Interlock Switch – Part Number: WD21X10261
Interlock Switch
★★★★★
★★★★★
(13)
PartSelect #: PS1481922
Manufacturer #: WD21X10261
This part is a simple on/off mechanism that prohibits the appliance from operating when the door is open.
$34.08
  Special Order
Door Latch – Part Number: WE1M1011
Door Latch
★★★★★
★★★★★
(2)
PartSelect #: PS3502777
Manufacturer #: WE1M1011
This part helps to keep the door closed while the machine is running.
$19.90
  Special Order
Drum Bearing Sleeve – Part Number: WE1M462
Drum Bearing Sleeve
★★★★★
★★★★★
(1)
PartSelect #: PS266777
Manufacturer #: WE1M462
Sold individually.
$9.84
  Special Order
Door Strike – Part Number: WE1X1192
Door Strike
★★★★★
★★★★★
(2)
PartSelect #: PS266893
Manufacturer #: WE1X1192
TThe door strike for your dryer is mounted on the dryer frame that the door shuts onto. It fits into the door catch on the door and keeps the door closed. If the door strike is damaged or missing, the...
$12.12
  Special Order
Drum Glide Bearing - White (Sold individually) – Part Number: WE3M51
Drum Glide Bearing - White (Sold individually)
PartSelect #: PS4704230
Manufacturer #: WE3M51
$13.72
  Special Order
High Limit Thermostat - L315-65 – Part Number: WE4M137
High Limit Thermostat - L315-65
★★★★★
★★★★★
(6)
PartSelect #: PS267900
Manufacturer #: WE4M137
This part is the replacement high-limit thermostat or safety thermostat for your dryer. The high-limit thermostat is found on the upper right-hand side of the heater housing, and it cuts off power to ...
  No Longer Available
Retainer O-Ring – Part Number: WE1M461
Retainer O-Ring
PartSelect #: PS266776
Manufacturer #: WE1M461
This is a replacement O-ring for the drum bearing retainer on your dryer. The drum bearing is found at the back of the dryer drum. The O-ring is designed to create a seal on the drum bearing. The O-r...
$33.58
  Special Order
Knob and Clip – Part Number: WH01X10313
Knob and Clip
★★★★★
★★★★★
(1)
PartSelect #: PS1482289
Manufacturer #: WH01X10313
This knob accepts a D-shaped shaft.
$16.63
  Special Order
Push-to-Start Switch – Part Number: WE4M416
Push-to-Start Switch
★★★★★
★★★★★
(2)
PartSelect #: PS3487190
Manufacturer #: WE4M416
This switch is used to activate the dryer.
$23.21
  Special Order
Door Handle - White – Part Number: WE01X20419
Door Handle - White
PartSelect #: PS9494490
Manufacturer #: WE01X20419
This part is on the outer door of the dryer.
  No Longer Available

Questions And Answers for HTDX100EM8WW

Ask our experts a question about this model and we'll get back to you as soon as possible!

9 questions answered by our experts.
  • 1
  • 2
Sort by:
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Kelly
November 26, 2019
The dryer timer knob cracked so we used pliers to turn it now the metal has snapped off. So do I need to purchase the timer system and the knob or do those both come together or is that even what I need to fix it? And how long does this part take to receive once ordered. Live in Indiana. Thanks
For model number HTDX100EM8WW
PartSelect logo
Hello Kelly, Thank you for the question. Both the Timer Knob Part Number: PS1482196 and the Timer Switch Part Number: PS8746223 will need to be replaced. They are sold sepratley. You can enter the part number into the website and there will be a add to cart button to proceed with the order and choose your shipping method. You can pay with Credit card or PayPal on the site. Hope this helps!

16 people found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
Suzanne
March 9, 2020
Which part i need to make my dryer heat up?
For model number HTDX100EM8WW
PartSelect logo
Hello Suzanne, Thank you for your question. I would first suggest testing your thermal fuse and your thermostats. Then I would suggest testing your heating element and your door switch. You can test all of those parts with a multi meter. I hope that helps. Good luck with your repair.

4 people found this helpful.

Was this helpful?
Thank you for voting!
Rick
September 1, 2022
ONLY TURNS ON ON FLUFF/NOEAT
For model number HTDX100EM8WW
PartSelect logo
Hello Rick, thank you for your question. The issue may be a faulty Cycling Thermostat PS267926. We have a video for you to access. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you.

Was this helpful?
Thank you for voting!
Related Parts:
Corie
October 31, 2022
My dryer just all of a sudden stop drying. My question is, is it a reset button of any on it or I have to change and if so where is it located?
For model number HTDX100EM8WW
PartSelect logo
Hello Corie, thank you for reaching out. We have researched your model and found that there is no reset button on your model. This issue could be caused by a fuse, part number PS10065161. If that does not help, we would recommend replacing the timer, part number PS8746223. Please reach out to customer service if you need help placing an order, anyone will be happy to assist you. We hope that helps.

Was this helpful?
Thank you for voting!
Related Parts:
Edward
December 7, 2022
Would the heating element burn out if the belt broke and it ran without turning
For model number HTDX100EM8WW
PartSelect logo
Hello Edward, thank you for contacting us. A non-turning drum due to a broken belt does increase the chances of burning out the heater but it is not necessary to always happen. We would recommend checking the heater, part number PS8756702, for continuity with a multimeter. If you need help placing an order for it, please feel free to give us a call. We look forward to hearing from you!

Was this helpful?
Thank you for voting!
Related Parts:
  • 1
  • 2

Common Symptoms of the HTDX100EM8WW

[Viewing 10 of 10]
Noisy
Fixed by
these parts
Fixing Fixing Fixing
Show All
Door won’t close
Fixed by
these parts
Fixing Fixing Fixing
Show All
Marks left on clothes
Fixed by
these parts
Fixing Fixing Fixing
Show All
Will Not Start
Fixed by
these parts
Fixing Fixing
Show All
Drum Not Spinning
Fixed by
these parts
Fixing
Show All
Too hot
Fixed by
these parts
Fixing Fixing Fixing
Show All
Won’t Start
Fixed by
these parts
Fixing Fixing
Show All
Timer Not Working
Fixed by
these parts
Fixing Fixing
Show All
Door latch failure
Fixed by
these parts
Fixing
Show All
Touchpad does not respond
Fixed by
these parts
Fixing
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
the knob broke and my daughter tried turning the end of the knob with a pliers which broke the end which disabled the timer.
I unscrewed the back panel took out the broken timer replaced it with new timer put on the new knob and screwed the panel back on.
Parts Used:
Dryer Timer Timer Knob
  • McKinley from Meraux, LA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
211 of 272 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Drum belt broke
Removed the front Dryer panel. Left drum in place and lifted it up slightly to get access to motor drive. Slipped belt in place and put panel back on.
This was a first attempt ever at fixing an appliance and it was no big deal.
Parts Used:
Drive Belt
  • Adrian from Middletown, MD
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
184 of 264 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
original duct was broken
Dear PartSelect.com,

My repair went off without a hitch.

2 screws removed to remove top.
4 screws removed from inside to remove front panel w/ door.
4 screws removed from top of control panel, loosed and popped top right off.
Flathead screwdriver to pop off old plastic panel.
Removed old wire chase (plastic, approx 3” long).
Removed built-up lint, wiped down area for new duct.
Snapped new duct on.
Dryer works like new!!
Took about 35 minutes, most of time spent cleaning up inside of dryer from lint due to broken duct.

One problem was that salesperson sold me on a new felt strip to go with new duct. That felt comes already installed on the new duct so I did not need it. Cost me a few extra dollars I did not need to spend.

Other than that, easy ordering, fast shipment, and parts are as close to original as possible.

Thanks for all your help!
Parts Used:
Duct Felt Seal Dryer Lint Chute Assembly
  • Chad from Gilbert, SC
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
141 of 161 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!