All Installation Instructions for Hotpoint Dryer HTDP120ED6WW

Broken Door Handle

Clips on the inside of the door handle had snapped off, 1 minute later it worked like new. NO TOOLS required! So happy my older appliances can have new life by the parts carried by PartSelect. Thanks!

Parts Used:

Door Handle - White

Cheryl from Old Town, FL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

8 of 12 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

broken dryer handle

My husband broke the door handle, but of course, i had to be the one to order the part & fix it. I ordered the part on the weekend and much to my suprise it was on my doorstep on Tuesday when I got home from work. Then I saw the part was shipped from nearby Louisville. I was overly happy with partselect!!!!! All I did was open the packaging and clip the dryer handle into the 4 holes. Easy as pie!!!!

Parts Used:

Door Handle - White

Angela from Richmond, KY
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

6 of 7 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Dishwasher wouldn’t start

Took the screws out of the back of the doorl located the switch and replaced it put screws back in and it was fixed

Parts Used:

Interlock Switch

Stephen from MARENGO, OH
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers

7 of 10 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Plastic housing for the door latch mounted in the chassis of the dryer was damaged so the section of the latch in the door wouldn't align.

This kept the interlock open and shut off the dryer when the door swung open The broken latch was popped out using a flat blade screwdriver and the replacement snapped into place by hand. Good as new!

Parts Used:

Door Latch

STAN from UPPER ARLNGTN, OH
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

5 of 5 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Dryer timer stopped working

Removal of old from mount was easy, did take photo of wires before their removal. Replacement timer came within 3 days,installation went smoothly. Only find that timer's operating time varies from graphics on dryer as to amount of time on, but easy to make adjustments.

Parts Used:

Dryer Timer

Robert from WEST CHESTER, PA
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers

5 of 5 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

had a bad switch,would not start

opened up the control cover, pulled off the 3 wires to the switch. unclipped the swutch from the panel and reinstalled the new exact replacemnt sww you sent

Parts Used:

Rotary Start Switch

jack from payette, ID
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers

6 of 8 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

My dishwasher would not start.

I unscrewed the inside of the dishwasher door and clearly saw the old interlock switch. This dishwasher has two, but it was obvious that one switch worked and one didn't (one switched was permanently pressed in). I removed the old interlock switch. It was tricky to pull out and I felt like I was going to break it but after watching youtube videos, I was pretty sure you just have to pull hard. I easily put the new switch in, reattached the dishwasher door, and it works perfectly!

Parts Used:

Interlock Switch

Rebekah from NEW ORLEANS, LA
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers

5 of 5 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Dishwasher would not start

Removed panel to access the interlock switches. There were two. The button on one switch was fine and the button on the other would not depress. Ran a continuity test and it failed. The switch also had a burnt smell

Parts Used:

Interlock Switch

Dameon from SMYRNA, DE
Difficulty Level:
Easy
Total Repair Time:
1- 2 hours
Tools:
Pliers, Screw drivers, Socket set

4 of 4 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

dishwasher did not start

Took out interlock switch (two leads) and replaced with new one. As simple as that.

Parts Used:

Interlock Switch

Lawrence from ROLESVILLE, NC
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins

7 of 13 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Dyer start knob broke.

Dryer is 3 yeras old. This dryer switch / start knob broke three times. First two GE repair fixed it. Charge was about $75 to $100. Then I found Parts Select, Who what great prices. Switch cost under $10. and took me 10 minutes to install. Dryer works great again. OH, I ordered an extra switch to have on hand.

Parts Used:

Rotary Start Switch

Joseph from Claremont, NC
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

5 of 8 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Catching clothing and reping

Removed that to screws for that top first and door shake top little to that front and I took two screws on that top each side and removed that front and lint trap and install the new

Parts Used:

Dryer Lint Chute Assembly

Jose from LILBURN, GA
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers

4 of 5 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

lint filter was broken

remove the broken one and replace it with the new one

Parts Used:

Lint Filter - White Frame

walter from STRATFORD, CT
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins

3 of 3 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Dryer bulb burned out

Son found out where the bulb was by using YouTube. I googled lamp for model number and your website came up. I ordered the part, it arrived promptly, and my son installed it.

Parts Used: